Saturday, January 31, 2015

Battery eliminator for AA battery clock movements.

Are you tired of replacing batteries in you DIY clocks? This little device is reasonably priced and does the job. Turn your AA battery powered clock in to a AC powered clock. I just received this in the mail and installed it in one of my clocks. I bought it from Norkro for $9.99 + $5.90 shipping and handling. I found the same product on Klockits website for a buck cheaper but there shipping was a buck higher. I am more familiar with Klockit so I probably would have ordered from them if I had seen it before I placed the other order. The order from Norkro.com was shipped timely without problems so all was good.

There is not much to review with this product. It replaces a single AA battery. Just replace the battery with the AC powered substitute and you are all set. The power cable is six feet long. The attached wall wart is not too to large at about 2.25 inches long.

If you sell your clocks at Arts and Crafts shows this is a nice up-sell for your customers. If you give your clocks as gifts this really add a nice touch.

They also have one to replace C batteries.

The picture below shows the battery eliminator attached to one of my clocks.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns. The 2014 update DVD is $7.50 and has 223 patterns.

Thursday, January 29, 2015

Happy Valentine's Day Scroll Saw Pattern.

-
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013, 2014 update DVDs are $7.50 and has another 178 patterns. The 2014 update has 223 patterns.

Tuesday, January 27, 2015

Basketball Fanatic Scroll Saw Pattern.

This pattern will hang well for the basketball fan in your life. The backboard is 10" X 8". It would be easy to customize this pattern for your favorite team. Just use a stencil font to add the team name to the backboard in place of the current text.

Just another note about email. I am days behind. Please forgive me for not answering your email if I miss yours.

  
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns.

Sunday, January 25, 2015

BigFoot Products DCS Review. Dust control for the DeWalt DW788.

Let me start out by letting you know that this is not a paid review. The product was supplied to me for free for review purposes. I have no affiliation with BigFoot Products.

Dust control can be a big problem when scrolling. David from BigFoot Products ask me to check out his new DCS(Dust Control System). I went into the shop and put it through some tests. Check out the video below to find out how it did.
-
 -
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns.

Fairy Heart Scroll Saw Pattern.

I think any young girl would love to have this hanging in their room. The original fairy graphics was supplied from vectorportal.com and was modified by me for the scroll saw.

 

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns.

Thursday, January 22, 2015

Fish Sculpture Scroll Saw Pattern.

-This project is all cut from 3/4" Thick material. The fish is over nine inches long. It's going to be a little fragile so you will have to sit the sculpture in a careful location.


I'm always watching Youtube for interesting scroll saw videos. I found one tonight that I think is a fantastic example of free hand folk art on the scroll saw. Christopher Demetrick designs and cuts a folksy looking fun project. It's not too long so give it a look.

 

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns.

Valentine Love Birds Scroll Saw Pattern.

-
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns.

Tuesday, January 20, 2015

Amazing Grace Sign Scroll Saw Pattern.

-
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013, 2014 update DVDs at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns. DVD update 2014 has 223 patterns.

Contest Time....

Sue Mey is again sponsoring our giveaway. She has offered a $35 gift certificate that can be used on her website. I will put up a $25 gift certificate from Amazon.com for the second place winner.

Here are the rules for this months giveaway. Don't follow the rules exactly and you will not win.

Visit www.scrollsawartist.com.

At the top of the page there is a menu titled "Pattern Tutorials". Open that menu.
Sue has 6 tutorials listed on that page for making patterns. Each tutorial image shows an animal.
Send an email to giveaway@stevedgood.com
In the subject type the animal shown in the tutorials.

You can enter once per day.
Entries have to be received by Saturday January 31st 2015. Midnight Eastern time U.S.

The winners with the correct answer will be drawn at random.

Please take some time to visit Sues site and look what she has to offer. I have run out of words to describe my appreciation for her talent. There are so few high quality pattern designers in our hobby that it is very important that they are supported. On top of the fact that she designs great patterns she also has great prices. Valentines day is soon and Sue has just the right pattern for that Valentine in your life.  Go there now. www.scrollsawartist.com

Below is a note from Sue with her current special offers. Instead of buying another Valentines Day card this year make one of Sues plaques for your Valentine.
-


logo

Note: The items shown are linked to the website - Click on either the Description or the Image for it to open there
Once again I have made a set of plaques - for Valentine's Day, observed on February 14 in many countries around the world. Valentines is all about love, hearts and roses, and all these symbols are featured in the patterns. Cut the designs using 1/2" to 1" (12mm to 25mm) for a substantial plaque project. Alternatively they can be cut from 1/8" (3mm) wood. Drill blade entry holes and make the inside cuts of the designs. Use small pieces of thin double-sided tape in a few places to attach the work piece on top of the wood for the backer. Cut the scalloped perimeter line of the pattern through both layers of wood. Detach the work pieces, remove the double-sided tape, and sand them by hand. For overlays made from birch plywood, add a darker wood (or painted backer), to accentuate the designs. Complete the project by gluing the overlay on top of the backer. Attach a saw tooth hanger to the back. Instead of using it as a wall hanging, the plaque can also be displayed on a stand.
I am offering this set at a 25% discount as seen below, (added to Special Offers) but they are also available as single patterns.
NW1077 Hearts plaque set Six patterns - 7.9" diameter Value $30.00 Save 25% $22.50
 NW1077
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The six patterns are available individually. Please click HERE to view all six of them
 NW1071 NW1072
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Visit the Special Offers category for my e-Magazines. There are also pattern sets at reduced prices and a great deal on seven digital books: 40 Christian crosses, 44 Christmas projects, 40 Boxes, 46 Angel-themed projects, 50 Signs & Plaques, 50 Clocks and 40 Love & friends patterns.
Patterns purchased from my website are conveniently delivered as downloads to your computer for immediate printing and use. All patterns are available in vector format on request.
Sue Mey

Monday, January 19, 2015

Not for the faint of heart.


The DeWalt DW788 scroll saw is one of the most popular saws ever produced. Most potential buyers of a mid level saw will consider the DW788. I probably get more email about this saw than any other machine on the market. 
If you spend any time researching this model, especially on the internet you will see a wide range of comments. Both good and bad.

Originally the machine was manufactured in Canada. It had a very good reputation then which was well deserved. These were known as the type 1 machines. Eventually production was shipped over seas and the quality dropped. It took some time but eventually most of the quality issues were worked out. These were the type 2 machines. If you are interested you can check to see which type machine you have by looking at the label on the motor.

Today I can recommend the DW788 as a quality machine. That's not to say that they don't have problems. All machines can have trouble. For the current price of the DeWalt DW788 I don't think you will find a better saw. The one exceptions to this is the Delta 40-694. It is the Delta version of the DW788. They are nearly identical so I consider them both together. You can often find a better deal on the Delta so it's is something to consider.
The reason I wanted to talk about the DeWalt is because I received an email from Bob Brokaw of the Gwinnett Woodworker association today. He has a great deal of experience servicing the DW788. Bob has taken the time to put together a four part video series showing the dis-assembly and common repairs of the machine.

Let me say up front that these procedures will void the warranty of your machine if you try them your self. These should be preformed by a qualified service technician. With that out of the way I do think it's very useful to know and understand your machine. Even if you never attempt these procedures on your machine you will have a very high understanding of how the machine works. This can be useful even if you have a tech service the machine. 

Thanks Bob for a wonder gift to the DeWalt scroll saw users. 

Part One:
http://youtu.be/bNt2Y0ajDwk
Part Two:
http://youtu.be/nWksSKjIEbs
Part Three:
http://youtu.be/2-p-LanzTho
Part Four:
http://youtu.be/HSxknKfrAQ0
-
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013, 2014 update DVDs at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns. DVD update 2014 is $7.50 with another 223 patterns.

Sunday, January 18, 2015

It's about time that we make something simple.

This desk clock is very simple to make. I used 1/4" maple for the face. The back is 1/2" thick walnut. The feet are 3/4" walnut. The clock face is five inches square.

One tip when making the feet. Make sure the notches are a snug fit to the clock. Build the clock body then cut the notches to fit. The notches in the feet are at a slight angle so the clock leans back a few degrees.

I buy the clock movements that are 2 1/8" X 2 1/8" square and have a stem that fits 1/4" Thick face. These clock movements are cheap and you can come up with all kinds of projects using them.

 
-
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013, 2014 update DVDs at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns. The 2014 update is $7.50 and has another 223 patterns.

Thursday, January 15, 2015

Modern Mantle Clock Scroll Saw Pattern.

This mantle clock is 10.5 inches tall. I used maple for the clock face, cherry for the legs and walnut dowels for the clock leg stretchers and face pips. I used a 2 1/8" X 2 1/8" X 1/4" clock movement. The hand set is 4 7/8" long.

Cut the legs and join them with 1/4" diameter dowel stock. Then cut the face. Drill the pips so the 3/8" diameter dowel stock can be glued into the holes and sanded flush. Experiment with different drill bits to make sure you get a good sung fit. Not all dowel stock is sized exactly as labeled.

Pay attention to the details. Watch the grain of the wood on the clock face. It should run vertical. When you glue in the dowel for the four pips on the face make sure the grain runs with the clock face. Take the time to get the dowels sanded flush with the face and legs.  When you assemble the leg assembly make sure it stands without rocking on two of the legs. Both legs need to be exactly the same height.

The face is just glued to the front legs assemble. I did it that way to make sure you could get the face square. You want the face vertical. Notice how the wooden box around the clock movement sits on the legs.

This is you chance to practice cutting perfect circles. If the face is not round it will stand out badly. Your blade should never lose contact with the pattern line when cutting the circle. If you need to tip for cutting circles take a look at the video below.
-
-
 
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KVD43MBSX969Q
Click book to purchase.
This book is only available in digital format. There will be a link on the final payment page that directs you to the download page. I will also send an automated email with the link to the download page.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns.

Scrollsaw Workshshop 2014 Pattern Catalog Update DVD Available.

http://Kunaki.com/MSales.asp?PublisherId=134145
Click image to order the DVDs

Many of you have ordered the Scrollsaw Workshop Catalog DVD over the last couple years. I just published the 2014 update DVD. It is available now for $7.50 plus shipping.

For those of you not familiar with the DVD set let me explain. A couple years ago I was asked to make all my free patterns available on DVD. Please understand that these are the same patterns that are available for free in the online catalog. The DVDs are for those who have limited bandwidth, don't want to download them but want to have them all in case my blog goes away or just want them for their club archive.

Disk number 1 contains the first 1,100 patterns from the beginning of the blog.
Disk number 2 contains 178 patterns from 2013.
Disk number 3 contains 223 patterns from 2014.

The latest 2014 update has 223 patterns. Click the download button below to see a list of the included patterns.
 


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

http://www.stevedgood.com/catalog/

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click here for the Free Online Catalog.

-

Wooden Vases on the Scroll Saw Book $12 Each

http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
http://www.stevedgood.com/swpd/swpdorderpage.html
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.
Download the Free Oval Key Chain Pattern Maker. Create Oval key chain patterns in seconds.
Download Version .9a
Please consider a $5 donation for The Oval Key Chain Pattern Maker.

T-Shirts and More.

T-Shirts and More.
Show your love for the hobby and support the Scrollsaw Workshop. Safe and secure order fullfilled by CafePress. Take a look. You are sure to find something you like. CLICK THE IMAGE to visit the store.

The Lifter

Papa's Custom Patterns.

www.papasworkshop.net

Philip Lowndes Noah's Arc Pattern Available. Watch the video below.

This video is from Philip Lowndes. He is the designer of this beautiful Noah's Arc puzzle pattern. If you would like the pattern follow the link below.
Buy This Wonderful Heirloom Puzzle Pattern

Think Safety

Remember to keep the safety of yourself and others in your work shop in your thoughts at all times. Always wear eye and ear protection. Follow all the manufactures warnings that came with your power tools. If I demonstrate something on this web site that you don't feel is safe, don't do it. Your safety is your responsibility. Fingers are handy things, try to keep all of them.
__________________________
Disclaimer:
The Scrollsaw Workshop Blog is in no way affiliated with or sponsored by Scroll Saw Woodworking and Crafts Magazine formerly (Scroll Saw Workshop Magazine) or it's publisher Fox Chapel Publishing.

Scroll Saw Woodworking and Crafts