Welcome to the Scrollsaw Workshop. You will find FREE scroll saw patterns, video demonstrations, scroll saw links, reviews, and much more. Sign up for the email newsletter so you won’t miss a single post. Thank you and remember to set a bookmark.
I know that many of you love to cut puzzles. This circle puzzle should be a challenge to work.
We had a very busy week at work so I had little time in the shop until today. I thought I would experiment with something a little different. I came up with this long stem goblet made using the the scroll saw bowl technique.
You will need 1/2" Thick wood for the cup and 1/4" Thick wood for the foot and stem ring. I also used 5 inches of 5/16" diameter dowel for the stem.
There are only three rings that require an angle cut so I made all the 90 degree cuts first. I only cut the angles on the interior of the rings because its easy to just sand the exterior of the cup to shape with power sanders.
Drill the interior hole at the angle shown on each piece.
Make the angled interior cuts.
Lay out all the pieces in the correct order.
Stack and glue the cup together.
Don't glue on the bottom until after you have the interior of the cup sanded. This gives you better access to make the interior nice and smooth.
I used an assortment of power and hand sanding equipment to smooth and shape the cup. After the cup is completely sanded glue on the stem assemble and finish.