Every shop needs a sturdy wooden mallet.

This is not a project that you would usually use a scroll saw for but what the heck. This is a scroll saw blog after all. Actually this project comes together quite nicely using the scroll saw.

The mallet is made from Hard Maple. The handle is dovetailed and pined with dowels for strength.
The handle protrudes from the head seven inches. This feels just right to me but it's not a big problem to make it longer. It's plenty heavy made from the maple but there is an option in the pattern to hollow out the center and add lead weights. I don't think it needs them but it's pretty standard practice so I included the option.

I used a #12 blade for cutting the hard maple. I think that might be the first #12 blade I have used in years. It was worth digging them out for this project. That hard maple is a challenge to cut.

The pattern has all the instructions to complete the project.

Here are the pictures I took while I was building the mallet. There is more detail in the pattern.

-----  

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

Click book to purchase.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns.

Love Music Scroll Saw Pattern.

Just a couple of updates. For those of you who have purchased my Wooden Vases book there is a typo on page 29. The center piece should be 1 inch thick and not 1/2 inch thick. I have updated the book and you can download it again from the link I sent if you would like. If you have not purchased the book and would like a copy it is available on the blog.

Yesterday I posted a contest for a couple of nice giveaways. If you missed it make sure you check yesterday's post. I will post it again tomorrow just to make sure everyone gets a chance to enter and take advantage of Sue Mey's wonderful offers.   Because there were two posts yesterday the offer and contest got buried and some people missed it.

Today's pattern is about 7.5 inches tall. This is one pattern that I think would look really cool enlarged to a much bigger size. Don't forget that any pattern in my catalog can be resized using the link on my blog to RapidResizer. Just visit the blog and look in the left hand column for the RapidResizer logo. There are instructions there if you need help.   Below is an example of RapidResizer print out after enlarged 200%. It would print on six sheets of paper.
 

-
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns.