Sunday, June 12, 2016

Cutting Vinyl Records. Making a Silhouette Vinyl Clock.

You probably have a few old vinyl records in the closet or down in the basement.  Here is a project that you can turn one of those records into a unique desk or wall clock. I kept the pattern fairly basic because if this is your first try cutting vinyl you will find it a little challenging.

Vinyl cuts easy. That's a problem because it cuts so easy it can be difficult to control the blade. Use a #3 or smaller blade and turn the saw speed down. Make sure you apply blue painters tape to the record as shown in the pattern. Take your time. You could also try stack cutting two records. The thickness of the two would help you control the blade. Make sure they are lined up and taped together securely.

Another problem is that it's difficult to turn the record on the saw table while cutting. I just slip my fingernail under the record and lift up just enough to get hold of the edge.

I also had to slightly enlarge the center hole for the clock movement to fit. I used a clock movement designed for 1/4" thick clock face. I used the white side of the hands so they would stand out better. 
 
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Click now and make a family heirloom this weekend.

If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns. The 2014 update DVD is $7.50 and has another 223 patterns.