Saturday, April 15, 2017

Jesus Cross Scroll Saw Pattern.

http://www.stevedgood.com/estore/estore.html
I will probably take the rest of weekend off. I know many of you will be traveling this Easter weekend. Please be safe and enjoy the day with family and friends. 
_______________

Information: Jet Scroll Saws and Reverse Tooth Blades.

I came across some information I was not aware of until recently. In the picture below I am showing a reverse tooth blade. Notice that the bottom few teeth point and cut in the opposite direction. This allows the blade to cut on the upstroke. This reverse cutting greatly reduces the amount of tear out on the bottom of the wood. Many scrollers use reverse teeth blades as their default blade.

The center image shows the Excalibur with a reverse tooth blade installed. The arm is in it's max up position. It's a little hard to see in the picture but the reverse teeth are above the surface of the table. Obviously they have to come this high to be able to cut on the upstroke.

The third image is the Jet scroll saw with the same blade installed and also at it's highest position. Notice that the reverse teeth do not come above the table surface. This makes regular reverse tooth blades useless on this saw.

I don't think this is a huge problem because there are blades that will give the same or better results than regular reverse tooth blades. As Jet scroll saw owners we just need to know which blades will work.

I am only starting to get my head wrapped around this problem. I need to spend more time trying to understand what the options are to get around the issue. I do know that the Flying Dutchman Ultra reverse blade will not be affected because of the way it is designed. What I want to try to figure out is which blades we can use with the same results as a reverse tooth blade that will work on the Jet machine. 

I do not know this for a fact but I have been told that Jet is aware of the problem and has said it is not something they plan to address. At this point I'm not sure there is anything they can do about it anyway. 

If anyone has any thoughts or information on this issue please pass it along to me.  I will be giving this more attention next week. 
_______________

I met Henry Wang:

This link is to my Amazon Affiliate. This is such an important tool that you should buy one even if you do not use my link. Woodcraft sells this product as well as many other online woodworking sites. 

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG


I had the privilege to meet Henry Wang recently. He is the inventor
of the GRR-Ripper. I'll tell you what I told him. I am convinced that the GRR-Ripper has saved me from at least one serious accident. Probably more. Table saws, jointers and router tables can all be dangerous tools. It is extremely important that you follow every safety precaution. 

Unfortunately mistakes happen and people are seriously injured on these machines. Over 67,000 woodworkers are injured on table saws every year resulting in over 4,000 amputations. If you cannot afford this push block please buy a cheaper one or make one. Learn the proper use of these tools.

I think the GRR-Ripper is the best push block ever designed. I use mine all the time. I feel safer for it's use but I still keep my guard up. If you hear that voice in your head saying "this may not be safe", it's not safe. Don't do it. Find another way.

Every close call I have had, has happened because I was not paying attention or tried an unsafe procedure. 

The GRR-Ripper is an investment in your safety.

Watch the video below and decide for yourself.

  • 3-Directional Force for Unmatched Control of the Work piece
  • Moving-Blade-Guard Hand Protection
  • Precise 1/4" Thin Rips
  • Virtually Eliminates Kickback
  • Work with Small Stock Safely on the Table Saw, Router Table, Jointer, & Band Saw
  • 3-Directional Force for total control of the workpiece
  • Moving-Blade-Guard Hand protection




Please support our monthly giveaway sponsor. Bear Woods,
your source for Pegas scroll saw blades and craft supplies.
_______________
Do you need a source for scroll saw ready boards?
Look no more because Heritage Wood Specialties is
the source you have been looking for.

Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.
This DVD has 1,964 patterns published from 2007 thru 2016.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

You can view a video showing use of the DVD on a Windows PC and a MAC at this link

Click here to Order. 
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
http://www.stevedgood.com/donate2.html