Wednesday, January 31, 2018

Scroll Saw Wood Spirit Pattern.


I have always been fascinated with carved wood spirits. When we vacation in Gatlinburg Tennessee,  I love visiting the local wood carvers studios. There are many wonderful local carvers in the area and they do amazing work.  

There is no way to duplicate the amazing work of these artist on the scroll saw but I thought I would give it a try anyway. After hand drawing the fretwork of the spirit I decided he needed to stand out more. To do this I outlined the head and used this line to make a bevel cut. That pulled him forward and gave it more depth. 

This is one of those patterns that I almost changed names after it was complete. He seems to have a remarkable likeness to Charlton Heston as Moses or Ian McKellen as Gandalf. :) You can call it whatever you like. 



After applying the pattern and drilling the entry holes I cut the outside of the board away. I usually do the interior cuts first but I wanted a smaller board to work with. It was not much but it helped. When you are cutting a larger board you sometimes have to sit farther away from the saw. That can be uncomfortable so I try to minimize that distance.  
 I used a Pegas #3 modifies geometry blade for all the interior cuts. All the hair cuts end in points. If I had used a larger blade, It would have been harder to make those turns as sharp as I wanted. I would have had to use a slower technique of cutting into the tip, backing out and cutting into the tip from the other side. That works but it's slower. 
After I completed all the interior cuts I needed to do test cuts to get the correct angle for the bevel cut. I used some scrap from the same board and adjusted the tilt to 2.3 degrees for about a 50% relief of the board. Make sure you do the test because it will vary depending on the blade thickness of the board you use. 
 I have all the cuts completed and you can see the relief. Time to remove the pattern and start sanding.
I rounded over all the outside edges with the sand paper and did general sanding to get rid of all the fuzzies. 
When I do relief cuts I like to use hot glue on the back to hold the piece in place. It works far better than trying to get wood glue on the edges without squeeze out.

Email:

As usual I am way behind on answering email. Please understand that I do my best to answer as many as I can. Thanks for your understanding.

Just a few hours left to enter.

This Bear Woods, New Years $50 gift certificate giveaway has two opportunities to win.
Both winners will be chosen randomly.

WAY2WIN #1: Click the contest link above and enter. You can enter once per day.

WAY2WIN #2) Email a photo of your favorite scroll saw project of 2017 to service@bearwood.com, or upload the photo to our Facebook Page.  A random winner will be chosen by Bear Woods.  Limit of 3 entries per person.  Make sure when you email us to give us your name so we can contact you. 


- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 



Please support our monthly giveaway sponsor. Bear Woods,
your source for Pegas scroll saw blades and craft supplies.


Visit Heritage Wood Specialties
for your scroll saw ready boards.

Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  



Purchase the entire Scrollsaw Workshop pattern catalog for offline access.
This DVD has 2,300 patterns published from 2007 thru 2017.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing. 

Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
http://www.stevedgood.com/donate2.html


Ad: Affiliate

Delta Power Tools 40-694 20 In. Variable Speed Scroll Saw


Even with the recent price hike this is still one of the best deals in the industry. If you don't mind making your own stand this is a great mid level saw. If you are using an entry level machine and want to move up give this a try.

  • Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
  • Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
  • Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
  • Tool-free blade clamp allows for quick, easy blade changes in seconds