This display stand is cut from 1/4" Baltic birch plywood and painted white. I normally don't like to paint my projects but in this case, I think it worked out okay.
The top is eight inches in diameter so it's large enough to hold most indoor flower pots. Obviously, this project could be used as a display stand for other decorative objects.
Bonus Pattern. Dowel Drilling Jig:
This is not a jig you will need often but when you do it is helpful to have. Holding dowels or even square stock on end to drill a hole, in the end, can be difficult. This jig simply helps hold the stock parallel to the drill bit.
I was reminded of this jig by YouTuber, Stumpy Nubs. He recently produced a video showing this jig. You can see his demonstration of the jig at this link. Stumpy Nubs Video Link.
My version just adds additional sizes V's.
If your hole is intended to be in the center of the dowel then use a center finding guide to mark the center.
I like to use a handscrew clamp but even a quick release clamp will work(Not as well). Place the dowel in the appropriate V and add clamping pressure. Make sure the jig is held flat to the table.
If you don't own handscrew clamps they can come in handy. Amazon has a decent one for $14.72. Harbor Freight has one for under $8. It's not bad. I bought one from HF a few years ago and I cracked it. It was probably my fault. The metal end caps also came off after a few uses.
Drill the hole. Don't try to drill all the way in one movement. Drill part way in the lift the bit to clear the shavings. Continue until you reach the depth you need.
A small dowel in the center V.
Drill the hole.
You can drill as small as a 1/4" diameter dowel with the jig.
You will want to use at least one-inch thick wood for the jig.
DOWNLOAD THE JIG PATTERN
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2018 in DVD
This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but on an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but on an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.
Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results.
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results.
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses who support our community.
Home of Pegas scroll saw blades.
Ad: AffiliateSilhouette SILHOUETTE-CAMEO-3-4T Wireless Cutting Machine - AutoBlade - Dual Carriage - Studio Software
I own the Cameo Silhouette 3 Vinyl cutter. It cuts more than vinyl but that is how I primarily use the machine. The software is easy to use and the hardware works very well. The AutoBlade makes setup a breeze.
I have made dozens of custom mugs and water bottles for trade shows and they come out great. (Not available for sale.). If you are a scrapbooker then the Cameo Silhouette will give you more creativity. If you want to make custom vinyl decals for cars or trucks the Cameo Silhouette will get it done.
I have used this machine a lot and rarely have a failed cut. When you think about how precise this thing has to be that is pretty remarkable.
- Cuts a variety of material including vinyl, paper, cardstock, fabric, and other materials up to 12 inches wide and 10 feet long.
- Use the powerful Silhouette Studio design software to create your projects. Features Bluetooth technology for wireless cutting or plugs into your home computer.
- Features a dual-carriage for multi-tool use and a higher 2 mm clearance to cut thicker materials. Is compatible with Print & Cut and PixScan technology.
- Is the only Silhouette compatible with the self-adjusting AutoBlade.
- Includes Silhouette CAMEO cutting machine, Silhouette Studio software, power cable and USB cable, 12-Inch Cutting Mat, AutoBlade cutting blade