I needed a desk organizer tray so that is today's project. I needed a place for my iPhone and business cards. One of the designs replaces the business card holder with a pen/pencil holder. I also included one without a business card or smartphone holder. You can see a diagram of all four designs below.
The smartphone slot is the cut that you may need to alter. I have a case on my iPhone so I made the slot larger. You may need to adjust for your phone.
The phone slot also has a hole for the power cable to come through. There needs to be enough room for the power cable to plug into the phone. I put rubber feet on the bottom of the organizer to get it higher.
This is a two-layer design. To get a good glue-up of the layers you want to select boards that are relatively flat.
In this project, it is important that the lines be cut as straight as possible. A crooked cut will really show up in this project. Sand away any miscuts before you to the glue-up.
The picture below shows the rubber feet I used. These are self-stick feet that you can get at almost any hardware store.
The next image shows the four designs.
Wooden Visions by Charles Dearing.
Charles Dearing has been producing incredible portrait style patterns since 1997. If he is not the best in the world he is darn close. Charles had to close the shop for a while but he now has his site back up and running. If you want a challenge, give one of Charles patterns a try.
He has a huge variety of patterns from celebrities to animals. Charles can also do custom patterns for you. If you have a loved one that you would like a beautiful pattern of then give Charles a shout. He has details on his web page.
These spectacular examples of portraits completed from Charles's patterns are a bit intimidating but when completed you will have something special. He also has patterns that are for us mere mortals.
Charles says all the patterns are downloadable after purchase.
He also has instructional vodeos available.
Over 1500 patterns are available including free patterns for you to try.
Personalized Christmas Ornament Patterns:
I am still making good progress on ornament patterns. I should be able to get caught up today. If you have orders in the queue, keep your eye on your email inbox.
The price is $1 per name with a 5 name minimum. I keep the price as low as possible
because I want everyone to have a chance to make these ornaments for family and friends.
You only pay after you have received the order and are
100% satisfied with the patterns. Invoice included with
the pattern email. Pay by credit card(secure Paypal), check, or cash.
The patterns will be emailed to you after they are completed.
Please allow up to a week for delivery.
You can use last names on the ornaments if you like but remember that the more letters the more
difficult they are to cut. Ten letters and up gets pretty small. If you need to you can enlarge the patterns by 10% to make the interior cuts larger. No special characters are supported. I can get a hyphen in there but it looks odd. It has to connect the two letters so it does not just fall out.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2018 in DVD
This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses who support our community.
Home of Pegas scroll saw blades.
Ad: Affiliate
GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
At the time I am posting the price is $56.91
This may be one of the most important tools in my shop. I have to make a lot of dangerous cuts on my table saw. The GRR-Ripper makes those cuts totally safe. It is easily the best pushblok on the market. Nothing else comes close.
- Protect hands and prevent kickback like never before
- Powerful high-friction durable grip for extreme hold
- Precision cutting and control down to 1/4" Ripping
- Fully adjustable for easy handling
- Work with small stock safely on the table saw, Router table, Jointer, & Band saw
- Made in USA. A true MICROJIG Innovation.
- Extended 3-Year . 100% Satisfaction .
