Some people will find this puzzle easy to solve and others will struggle a little. It makes a nice coffee table puzzle. Each post is a different length and each hole is a different depth. The goal is to insert the posts in the correct order until they all line up like picture 1 above.
This is also a nice problem-solving exercise for children.
It is fun to watch people work the puzzle. There is an obvious technique but most people will overlook the obvious.
It is fun to watch people work the puzzle. There is an obvious technique but most people will overlook the obvious.
There is an easier way to make this puzzle but I like the look of this one better. The easier way is to use a solid block of wood and drill holes in different depths. Then cut dowel rods to length to fit each hole.
The laser I own: Questions answered.
This is not an affiliate ad. This is only information in response to several emails.
I mentioned yesterday that I own a laser engraver/cutter. Many people emailed me asking for information on what I purchased. I thought I would give a brief overview.
I needed a more reliable laser to produce my Personalized Signature coins. The coins sell very well so I knew I could invest some money in the laser and make it back. I originally owned a cheap Chinese laser called a K40. It was fun to play with but not reliable. The tube went out in a year. It had other issues that made what I do less efficient.
Production quality lasers cost thousands of dollars. You can spend $10,000 plus in a hurry. I was not ready for that kind of expense so I researched what are known as Hobby Series Lasers. These range from $2,500 to $7,000. Maybe a little more depending on features. My H Series with upgrades cost just under $4,000. That's still a lot of money but I l already knew I could make money with it.
I ended up buying the Full Spectrum H Series laser. Full Spectrum is a company based in Las Vegas. I have been pleased with their service and support.
I upgraded the laser tube when I made my purchase from a 40w laser to the 45w laser. The 45w has a much better life expectancy. It also allows a bit more speed and power.
The bed of the H Series is 20" X 12". It comes standard with a red dot and air assist. These are both features that I considered essential. It is water-cooled. I did not want to spend the extra cash for a chiller. I may make that purchase later.
So what can the H Series laser do? It will cut wood, paper, leather, cast acrylic, and many other materials. It easily cuts through 1/8" thick wood. It will cut 1/4" thick wood but that can be spotty. Depending on the species of wood and the number of passes the laser makes it will usually cut through. 90% of the time I am cutting Baltic birch plywood. BB ply cuts well.
The laser can also engrave images into the wood. If you prepare the image correctly it can do a great job of the engraving quality. It will go to 1000DPI. It is slower at those resolutions so I normally use lower resolutions. It engraves at a good quality for what I do at a lower res.
I will be adding a second laser to my business soon. I will probably go with another laser from Full Spectrum. They have a different product line named Muse. I will likely look closely at that product.
The other model I am interested in is Glowforge. I still have more research to do but it is also in the same price range with similar features.
I have had several requests to do a video demonstration of this my H Series laser. I have avoided that because I did not think there was enough interest. Maybe I will reconsider if the emails keep coming.
Here is a point that many people do not understand. The laser does not replace a scroll saw and the scroll saw does not replace a laser. They are very different tools with different capabilities. They are however very complimentary. Both can add value to the other in producing high-quality craft products.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2019 on DVD
This DVD has over 2,900 patterns published from 2007 thru 2019.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Ad: Affiliate
Official Creality Ender 3 Pro 3D Printer with Magnetic Build Surface Plate and UL Certified Power Supply Metal DIY Printers 220x220x250MM
The Creality Ender 3D printer gets good reviews for an entry level 3D printer. If you are interested in jumping into this exciting maker niche then the Ender is a good start.
If you want to get off to a fast start then check out all the free 3D objects you can download a Thingiverse. There are thousands of objects to download.
- FAST HEATING & RESUME PRINT： The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- PRINTING STABILITY： Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly
- REMOVE EASILY:Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
- BRAND POWER SUPPLY:The brand power supply delivers more power with a stable output ensuring the temperature fluctuations are minimized, especially during long and intensive prints. Heat the hotbed faster and to higher temperatures before making the Ender 3 Pro a much better option for printing ABS and other high temperature high strength filaments.
- OFFICIAL CREALITY 3D AMAZON STORE. All of our products come with a 18 Months limited replacement part and lifetime technical support.We provide original part for after sale.more than 20 engineers provide professional customer service.