Monday, April 5, 2021

Mini Racer Scroll Saw Pattern.


  Click to Enlarge
 Download the Pattern Below
This is just a demonstration board. The final track should be at least 30" long.

This mini racer set can be made as long as you like. Probably a minimum of 30" long. 

I included a pattern for the starting gate but I ran out of time to get a finish winner gate. I'll see
if I can come up with one and add it later.

These cars are small. The numbers are very small. You skip the numbers and either draw them on or use stickers. I cut them with a #3 blade. I used a 1/32" drill bit.

If anyone has ideas for a finish gate that shows the winner let me know. Some kind of flip gate that is simple and can be cut from 1/4" wood is ideal.

Once again I am right up to my deadline so I will cut this short tonight.





$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2020 on DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.


for you scroll saw ready boards.

Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill


 
Ad Affiliate

DEWALT Scroll Saw, Variable-Speed, 1.3 Amp, 20-Inch (DW788)





About this item

  • Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
  • Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
  • On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
  • Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
  • Arm lifts so blade can be easily threaded through the material for inside cuts