Tuesday, July 6, 2021

Two Layer Sports Signs Scroll Saw Patterns


Click to ENlarge
 Download the Pattern Below


If you have a family member who enjoys any of these sports then they will enjoy this project. I know I left out many sports. If these patterns get a decent amount of download I will add more sports later.


These patterns are all around ten inches long. If you would like them bigger you can print them using the poster print feature of Adobe Acrobat DC. My patterns are all published as pdf files. If you use the standard pdf print software then you will have this option.

New browsers have built-in pdf printers that don't have the poster print feature. You have to use Adobe Acrobat DC to use this feature. Unfortunately, it takes some setup to get this to work in the browsers.

The red arrows point to the things you need to change to print the pattern on multiple sheets of paper. In the example below I have enlarged the pattern to 175%. It will print the pattern on four pages. After they print just line them up and tape them back together. 


Click to Enlarge

Should you spend the money to buy the manufacturer's scroll saw stand?

I'm not sure if I have ever spoken about manufacturer's stands before. When you buy most upper-end scroll saws you have the option to buy the stand that is made for that saw. They are often more expensive than a universal tool stand and much more expensive than just sitting the saw on your bench.

Let me just say upfront that I recommend the manufacturer's stands. The stands for Excalibur, Jet, DeWalt, Seyco, Delta, and Pegas are all quality accessories. When assembled correctly they absolutely reduce the amount of vibration. They also set the saw a range of heights that are comfortable for sitting and standing while you cut. This is not the case if you have to sit in a standard low chair or wheelchair.

Universal tool stands can be used if you prefer but remember that they are designed for multiple tool use. The height may or may not work. Make sure you buy a quality universal stand. Some of the very inexpensive stands will cause vibration.

Let me tell you a story about how important the stand is. I developed a slight vibration on my Pegas scroll saw. That was absolutely not normal so I started looking for the trouble. I went over the saw top to bottom and came up blank. It finally dawned on me to check the stand. Two nuts had vibrated loose on the stand. I guess I never got them tightened well enough. Those two loose nuts were adding to the vibration of the saw. I tighten them up and the vibration is gone. Yes, the stands do make a difference.

If you sit the scroll saw on a workbench you should bolt it down. I know this can be inconvenient if you have to put the saw away after you finish cutting. I have seen low-end scroll saws walk off a workbench
from vibration. You can also help a saw that has too much vibration by putting anti-vibrations sheets under the saw and bolting it down.

If you choose to build a scroll saw stand then make sure it is sturdy and ergonomically correct for your sitting/stand position. You can cause fatigue with a poorly designed stand. I also don't recommend wheels on a scroll saw stand. To get wheels that are strong enough and lock down tight enough is expensive. Cheap wheels are a prescription for extra vibration.

You can make all the above options work. Just don't cheap out and make a good saw bad.

 
Amazon Link


$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2020 on DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.


for you scroll saw ready boards.

Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill