I use a lot of spray cans. I use spray adhesive, Spray acrylic, and spray paint. I have a large spray can holder at the other end of my shop but I wanted something close to my small work table. This one holds only three cans but that's enough to have close by.
I mounted it directly on the work table but I put it on the front of the table just for the photo. I will move it to the back so it is out of the way but still handy.
Having the cans stick up above the top of the table would be a problem if this were my actual workbench but it's not. That is at the other end of the shop. This work table is only for glue-ups and some finishing work.
The holder could also be hung on a wall or anyplace that is handy.
I used 1/4" plywood that looks kind of flimsy but I added braces under the bottom tray to give it enough strength.
UPDATE: I went back and edited the pattern to include two center supports to help
secure the top tray. (See red arrow in the photo below)
I used cheap scrap plywood and it was not 1/4" thick. I always check the thickness when I am going to cut slot and tab construction. I did not change the pattern. I just cut inside the pattern line so the fit was snug.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Over 3,600 Digital Pattern Books. Many with multiple patterns.
Every Scrollsaw Workshop Pattern from 2007-2021 on DVD, USB drive, or Instant Download. Over 3,600 Patterns!
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.You will never run out of fun patterns to cut.
Three delivery options.
After payment, you will receive an email with the download link. This is a large file. You should not attempt to download it on a tablet or smartphone. It is a compressed file that will need to be extracted to your hard drive. Basic computer skill are necessary to extract the file.
The USB drive will be shipped to the US only first-class mail. Shipping time varies but you will get a tracking number. I normally ship within three days. USPS shipping normally varies from three days to a week.
The DVD is manufactured and shipped by my distributor. They ship to several countries but not all. Check their shipping list to see if your country is supported.
Here is a quick video showing you what you will get when you purchase the offline Scrollsaw Workshop Catalog
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Make sure you check out the Seyco Scrollers Drill
Ad Affiliate
Westinghouse Outdoor Power Equipment WGen5300v Portable Generator with 120/240 Volt Selector 5300 Rated 6600 Peak Watts Gas Powered, CARB Compliant, RV and Transfer Switch Ready
I have not used this generator. I am looking for one to buy so I have been researching reviews and this one seems to get pretty positive remarks. If any of you have any comments about generators please pass them along to me.
About this item
- 5300 Running Watts and 6600 Peak Watts; Recoil Start; 4. 7 Gallon Fuel Tank With Fuel Gauge; Up to 13. 5 Hours of Run Time Per Tank with 120/240V Volt Selector Switch
- Features One 5–20R 120V Household Duplex Receptacle, One RV-Ready TT-30R 30 Amp Receptacle, and One Transfer Switch Ready L14-30R 30 Amp Receptacle; All Outlets Have Rubber Covers for Added Safety
- Plug-and-Play: Comes With Oil, an Oil Funnel, a Tool Kit, and a User’s Manual to Get You Started Right Out of the Box (Minimal Assembly Required)
- Powered by a 274cc Westinghouse 4-Stroke OHV Engine Featuring a Long-Lasting Cast Iron Sleeve With Automatic Low Oil Shutdown