Fun little snake wiggle toy. This snake toy is cut from 3/4" thick wood. Instructions for cutting and assembly are included in the pattern. You will need a 1/8" dowel to connect the pieces.
I use a foot switch on all of my scroll saws:
One accessory that is a must for me is a foot switch to control my scroll saws. I like the extra control it gives me to always keep two hands on the board. If the board starts to bounce I can instantly stop the saw without reaching for the saw on/off switch.
There are two types of foot switches. One is called an on/off switch and the other is a dead man's switch. I recommend the dead man's switch.
Here is the difference. The on/off switch requires you to hit the switch to start the saw. Then you have to hit the switch again to stop the saw. This can take time especially if you miss the switch with your foot. In my opinion, you lose some control with this style switch.
The dead man style of switch requires you to push the switch with your foot and hold the switch down as you cut. As soon as you lift your foot the saw stops.
I have had good luck with the MLCS 9080 dead man switch sold on Amazon. I own a few of them and only once or twice have I had any trouble. I had one get flaky once and it would stop without me lifting my foot. I took it apart and blew the dust out of the switch and it has worked since. I have owned some of these switches for close to ten years.
I do know scrollers who prefer the on/off style of the switch and they find it easier to use. We are all different so choose the one that feels right for you. Either switch is better than using the saw on-off switch.
Another advantage to the foot switch is that you can control your dust collection with it also. That way the dust shop vac only runs when the saw is cutting. See the photo below for how I set this up.
I also screw the foot switch to a riser to get it to the proper comfortable height. I sit on a tall stool while I cut so I need the foot switch of the floor a few inches.
2022 Personalized Christmas Ornament Patterns are open for orders.
The order form will accept up to twenty names. If you need more than twenty then start a new order form. PLEASE double-check the spelling of names. PLEASE, make sure that you select an ornament style for each name entered. After the order form is complete scroll to the bottom and hit the SUBMIT Button.
I will complete the order and email you the patterns as a PDF just like all the patterns in my catalog. You will not need to pay for the patterns until they are delivered. If you are pleased with the patterns there will be a payment link in the email. There will also be an address to send cash or check payments
My goal is to complete the orders within three days. As the holiday season gets into full swing I may need more time. I will keep times posted on the blog.
Click for a larger view.
Click to Order
- -
Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated.
Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill
Personalized Pet Ornaments are $2 per name with no minimum order.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Over 3,600 Digital Pattern Books. Many with multiple patterns.
Every Scrollsaw Workshop Pattern from 2007-2021 on DVD, USB drive, or Instant Download. Over 3,600 Patterns!
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.You will never run out of fun patterns to cut.
Three delivery options.
After payment, you will receive an email with the download link. This is a large file. You should not attempt to download it on a tablet or smartphone. It is a compressed file that will need to be extracted to your hard drive. Basic computer skill are necessary to extract the file.
The USB drive will be shipped to the US only first-class mail. Shipping time varies but you will get a tracking number. I normally ship within three days. USPS shipping normally varies from three days to a week.
The DVD is manufactured and shipped by my distributor. They ship to several countries but not all. Check their shipping list to see if your country is supported.
Here is a quick video showing you what you will get when you purchase the offline Scrollsaw Workshop Catalog
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Make sure you check out the Seyco Scrollers Drill