I call this a basket because it does not have a lid. It's probably still a box, but you can decide. The parts are all cut from 1/4-inch thick wood, and the construction is slot and tab. The interior of the box measures 9 inches by 9.5 inches and is 4.5 inches tall.
Here's a tip when cutting projects that use slot and tab construction: the pattern will be the exact size, in this case, 0.25 inches for the slots. However, your wood will probably not be the exact size. For instance, Baltic birch is actually manufactured to the metric system. What we call 1/4-inch BB plywood is actually 6mm. 6mm is slightly smaller than 1/4 inch, so the parts may not fit if cut accurately to the pattern.
I lay the edge of the board I am going to cut over the slot on the paper pattern. This gives me an indication of how much I need to adjust my cut to make the parts fit together. I don't go to the trouble of marking the size on the pattern; I just estimate how much to undercut the pattern. If I have a 1-inch-long by 1/4-inch slot, the length will be accurate. I will need to undercut the 1/4-inch width for a good fit. I try to err on the side of too tight because I can always sand or cut more off.
Bonus Pattern: Candle or Vase Centerpiece
This will hold a 3" diameter candle or vase. It is cut from a single board. Every other piece is rotated 22.5 degrees and glued to the next piece.
.gif)
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Fretwork Basket Pattern
Candle Centerpiece Pattern
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Over 3,900 Digital Pattern Books. Many with multiple patterns.
Every Scrollsaw Workshop Pattern from 2007-2022 on USB drive, or Instant Download. Over 3,900 Patterns!
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.You will never run out of fun patterns to cut.
Two delivery options.
After payment, you will receive an email with the download link. This is a large file. You should not attempt to download it on a tablet or smartphone. It is a compressed file that will need to be extracted to your hard drive. Basic computer skills are necessary to extract the file.
The USB drive will be shipped to the US only by first-class mail. Shipping time varies but you will get a tracking number. I normally ship within three days. USPS shipping normally varies from three days to a week.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and are available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Make sure you check out the Seyco Scrollers Drill
Ad Affiliate Link
- Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced
- Dimensions – 17” L x 20.5” W x 10” H | Electrical Requirements – 120V, 60 Hz, 1A | Air flow – 300/350/400 cubic feet per minute | Cover rooms up to – 400 sq ft. | Noise rating – 50 to 60 dB
- Programmable timer automatically shuts unit off after set number of minutes
- Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away
- RF remote system allows for operation from any angle of the room, even if direct line of vision is obstructed