Useful Tip From Larry Cooper

Here is an email I received from Larry tonight. Thanks Larry for taking the time to share you technique with everyone. I know this will be useful for many of the readers.

Steve,

I saw your pyramid article and thought I would send along my way of supporting or suspending my scroll saw projects for spraying the finish.

I just took a piece of three quarter inch plywood about fifteen inches square and used my Air Nailer to shoot two inch air nails through the plywood. I drew lines on the plywood about one quarter inch apart so the nails would be evenly spaced. I then screwed a small Lazy Susan to the bottom side so I could spin it around as I sprayed a lacquer finish to my "Kiss The Cooks". Works real good.

I really enjoy your Scrollsaw Workshop web site.








The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.
Make A Donation