Monday, May 14, 2012

Inspector Gadget would be proud of this scroll saw stand by Bob Calhoun.

Bob Calhoun is a good friend who lives in Australia. He frequently sends me things he has come up with for his scroll saw. Bob is one of those guys who thinks outside the box. He likes to make things and he is good at it.

Yesterday he sent me a series of pictures of his mobile scroll saw stand. This thing is packed with everything a scroller could want. This would be the perfect stand to take to demonstrations. Roll it in, set it up and within five minutes you are cutting with all the comforts of home. Before you ask, I don't have plans for this stand. I doubt Bob even used plans. This is one of those projects that you just make up as you go.


Here is the left side view. The stand has nice large wheels for easy movement to whever you want to set up shop.
In this front view you see the stand with all the accessories folded in.
The right side.
You can see in this back view that he has mounted a power strip to plug in extra accessories. This picture also shows a good view of the handle to move the stand easily.
In this picture he is starting to unfold the stand.
Here is the stand completely setup and ready for business. Notice the two foot petals. The one on the left is a mechanical lift for the upper scroll saw arm. The one on the right is a dead man's switch to start and stop the saw. I love the cut out of the foot for the lift.

The stand also has a small fan to help keep comfortable while cutting.

The plastic bucket is convenient for disposing of cut offs.
He has incorporated storage inside the stand for his mini-drill press and drilling board.
They can't get the Seyco mini-drill press in Australia so Bob made his own version. Like I said earlier Bob likes to make things and he is good at it.
He added a hanger for the drill press on the left so he could use the flexible sander attachment on the Dremel tool.
This is a lap drilling board. He says he drilled into his leg one time. He made the lap board thick enough to keep that from happening again. :) The top board is designed so it is easy to replace when it gets too many holes in it.
There is also a small fold out table on the righ. This can be used with the drill press or maybe to apply patterns to the wood.
Here you can see the thickness of the lap drilling board.

Thanks for sharing this stand Bob. I always love the things you come up with.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation