This Mini-Grandfather Clock is 19 inches tall. It uses a 2 3/4" clock insert with a 2 3/8" diameter mounting hole. The fretwork is beginner level work. The three sections are just box construction. There are four dividers that are all the same size. The box sections are glued to the dividers then stacked and glued. The ornament fretwork pieces are glued to the front of the three sections.
Make sure you study the pictures in the pattern book before you begin. Build the clock in sections then stack the sections together. All the sections and dividers are flush to the back of the clock. Carefully center all the sections.
You can easily build this clock in a weekend. I spent around five hours cutting, assembling and finishing the clock.
