Here is a fun project. The patter uses acrylic sheets and an battery powered LED puck light. Let me say that I took this idea from a CNC forumn and made my own pattern for the scroll saw. On the CNC version the pattern in the acrylic is just etched. In the scroll saw version we cut through the acrylic. If you wanted to simulate the CNC version you could etch the acrylic with a dremel too.
Another option would to be to use real glass cut in 5" X 5" sheets and use glass etching creme with stencils. I have a CNC machine which I used to make an etched version and it shows up a little better.
The reason the box is made from two pieces is because the slit is shorter on the bottom to give the acrylic a ledge to sit on. It is critical the slit in the top and bottom line up when you glue the pieces together.
If you cut the slit accurately enough the acrylic will fit snugly and can be replaced with different designs. I include 5 designs in the pattern book.
The green tint in the is because the acrylic I used did have a green tint.
Don't let that put you off because the scroll saw version looks really good also. If you are good with pattern making these would make great personalized gifts.
Below is a picture of the 3 pack of puck lights I used for the project.
-
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Click now and make a family heirloom this weekend.
Click now and make a family heirloom this weekend.
If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns. The 2014 update DVD is $7.50 and has another 223 patterns.