This T. Rex is 10.25 inches tall. I cut this guy from 1/2" Red Oak. I seldom use Red Oak. It's not one of my favorite woods to use. The grain is so open that the blade has a tendency to the grain. If you cut Red Oak make sure you keep the blade nice and sharp. The sharper it is the less likely you will be to have trouble.
The original graphic was from vectorportal.com. I modified it quite a bit so it could be cut on the scroll saw.
A reminder to email newsletter subscribers. The newsletter is just a copy of the daily blog post. If you ever miss or lose an email you can visit the blog and find the same content. I cannot resend the email newsletter because that is an automatic service.
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.
Make A Donation
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Click now and make a family heirloom this weekend.
If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years
DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns. The 2014 update DVD is $7.50 and has another 223 patterns.
