Dig through your scrap bin for a couple pieces of wood. This project won't use much wood and it will only require two cuts on the scroll saw. I don't get much easier than this.
Simply cut the pieces and get ready to glue it up.
When you glue on the outer ring make sure you maintain a small gap for the photo. The outer will likely close up slightly after it is cut. Glue on the inner ring first and let it set. If needed slightly spread the outer ring being careful not to break it. Glue it on and use clamps to maintain the gap.
If the photo splays out at the top after it is installed then remove it and gently roll it up for a few seconds. After you reinsert it the splay should be minimized.
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.
Make A Donation
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Click now and make a family heirloom this weekend.
If you would like to have all the patterns in the Scrollsaw Workshop catalog you can buy the first six years
DVD and the 2013 update DVD at this link. DVD #1 is $20 and contains over 1,100 patterns. The 2013 update DVD is $7.50 and has another 178 patterns. The 2014 update DVD is $7.50 and has another 223 patterns.
