Here is another three layered project. I'm going to show you something a little different today. As you can imagine I can't possibly cut all the patterns I design. I do a new pattern almost everyday. There is just not enough time. Because of that time restriction I often simulate the finished project by simply adding wood textures the the pattern. This way I can still show you how I think it should look. I also usually add a drop shadow to give it some depth. The image above is the simulation of this project.
I also decided to cut this pattern. The finished piece is below. I did add a basic shadow box frame to the finished piece. I still receive email from new readers asking about what wood I use on a particular project. Because they are often simulated there is no answer to that question.
I just thought you may like to see the difference in how the images look when they are real or simulated.
Another very common question is about the thin lines on the pattern. If you look closely at the image below you will see lines in the cutting that add detail. In scroll saw speak these are called veins. Yes they are cut with the scroll saw.
Many people assume they are drawn in with a pen. You will notice that I always draw the veins starting from an open area. You simply begin the cut in the open area and cut to the end of the line then back out.
Backing out can sometimes be difficult. It is almost always better to leave the saw running while you back out the blade. Just take your time and turn the blade with the curves as you back out.
If you want the veins to stand out better you can use a thicker blade so the kerf is wider. I used a #1 blade for these veins so you could see what can be done with a small blade. After the cuts were all complete I used an Xacto knife to remove the dust from the veins and slightly open them up.
I also decided to cut this pattern. The finished piece is below. I did add a basic shadow box frame to the finished piece. I still receive email from new readers asking about what wood I use on a particular project. Because they are often simulated there is no answer to that question.
I just thought you may like to see the difference in how the images look when they are real or simulated.
Another very common question is about the thin lines on the pattern. If you look closely at the image below you will see lines in the cutting that add detail. In scroll saw speak these are called veins. Yes they are cut with the scroll saw.
Many people assume they are drawn in with a pen. You will notice that I always draw the veins starting from an open area. You simply begin the cut in the open area and cut to the end of the line then back out.
Backing out can sometimes be difficult. It is almost always better to leave the saw running while you back out the blade. Just take your time and turn the blade with the curves as you back out.
If you want the veins to stand out better you can use a thicker blade so the kerf is wider. I used a #1 blade for these veins so you could see what can be done with a small blade. After the cuts were all complete I used an Xacto knife to remove the dust from the veins and slightly open them up.
Click Image to Enlarge.
_______________
I wish I had designed these pieces of art!
Click image to visit site.
I like to look through Etsy.com and see what crafts people are selling. I often say "I wish I had done that." That's the case with the designs of this artist. I love these little people. They are whimsical and each one tells a story. Did I mention that I love these little people. These check off every criteria in my book for great design.
The profile name of the artist is germejeanbernard. If you like this kind of art go check out his Etsy page.
-
-
_______________
Enter the Bear Woods $50 Gift Certificate Giveaway:
We are down to just 5 days until we draw for the Bear Woods sponsored giveaway. Make those days count and get your daily entries in. The turn out is very high this month so every entry is going to make a difference. Last I checked there were over 5,600 entries. Thanks for the great participation.
your source for Pegas scroll saw blades and craft supplies.
_______________
Look no more because Heritage Wood Specialties is
the source you have been looking for.
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results.
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial
This DVD has 1,964 patterns published from 2007 thru 2016.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
You can view a video showing use of the DVD on a Windows PC and a MAC at this link
Click here to Order.
Click here to Order.
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video
Demonstration.
Ad: Affiliate
Bestten 16 Outlet Heavy Duty Metal Power Strip with 15-Foot Cord, Silver
These are great to add above a work surface or to the side of a workbench.
- 6 AC Outlets (15A) Ideal for Transformer/Adapter Use
- Heavy-Duty Power Strip: Sturdy all-metal extruded aluminum housing. Perfect for workshops, enclosed garages, offices and schools
- 15 Feet Grounded Power Cord (SJT 14AWG/3C). Power Switch with Integrated 15Amp Circuit Breaker
- Electrical Ratings: 60Hz/125V/15Amp/1875W. 110-125V 60Hz
- ETL listed. 3 Years Warranty. Mounting Brackets are included for all new orders since Sep 8