Large butterfly and Fairy welcome sign. The finished sign is slightly over 16 inches long. The pattern is broken up over two pages. Tape the pattern back together at the cut lines and apply it to your wood blank.
_______________
_______________
Segmented Angel Personalized Christmas Ornament Tutorial:
I have had several requests for a tutorial on the Personalized Segmented Angel Christmas Ornament. In the video below I show every step of the process. Even if you understand segmentation patterns you may find some pointers for this project.
One thing I show is the use of Peel and Stick as an inexpensive blue painters tape replacement for applying patterns. I will do another blog post showing the Peel and Stick in detail.
One thing I show is the use of Peel and Stick as an inexpensive blue painters tape replacement for applying patterns. I will do another blog post showing the Peel and Stick in detail.
_______________
Personalized Christmas Ornament Patterns:
Ornament orders are going well. I am getting them sent out within a couple days at this time. Thanks for all the orders. Keep them coming and I'll keep then shipping.
_______________
Guest Post:
I received this email from Lori Scott today. She put together an excellent write up on how she made this incredible drill press table. I have been looking at different builds to replace my table. I am pretty sure this is the one I will model mine after. I especially like the rotating insert. That is very practical. Thanks Lori for letting me share this with everyone.
Hi Steve,
After watching your video review on the Seyco scroller's drill, I am going to buy one. I have looked at it before but felt I could get by without it. Your review sold me on it's versatility though!
I just finished making this drill press table and fence (with dust collection) that will make life easier in my shop. I know you use your drill press a lot so thought I'd share how this turned out if you are interested. I noticed you have t-tracks on your drill press table. If you want to incorporate dust collection, you could make a fence like mine to use on your existing table. I didn't have any plans but gathered ideas online and came up with something that worked for me. I am also going to make another fence that is lower.
The fence is closed in this picture but it opens up to allow for dust collection.
Here the fence is open for dust collection. I put a T-track on top of the fence with sliding "stops".
To prevent blowout as the drill bit exits, I made the rotating replaceable disk. To get a clean spot for a new hole, it just rotates around. Once one side is used up, it flips over to expose a new side. I made extra inserts but one will last a long time. The white top and front on the fence is Formica. I applied it to the MDF substrate with contact cement and chamfered all the edges.
Here the disk is removed. I countersunk a larger hole under the disk to make it easy to insert my finger to rotate the disk. I cut a piece of Formica on the scroll saw to drop in the hole so the disk will be perfectly level with the top of the table.
This shows how the dust collection is set up on the back of the fence. I've always disliked having to clean up all the shavings while drilling a bunch of holes. It's nice to have good dust collection now. I put the high extended knobs on the fence to make it easy to adjust it forward and back in the T-tracks without having to reach over the fence to try and find small knobs. I located them so they would not interfere with the drill press handle. The fence is made from 3/4" baltic birch.--
To easily attach the table to the drill press I installed threaded inserts in the bottom of the table.
I used these jig knobs with fender washers to screw into the threaded inserts and attach the table.--
I bought the dust collection port and all the hardware (except the fender washers) from Rockler.
Keep up the great work on your scrolling blog! I just bought another of your patterns that I'm anxious to make for a Christmas gift.
Lori Scott
- -
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
your source for Pegas scroll saw blades and craft supplies.
_______________
Look no more because Heritage Wood Specialties is
the source you have been looking for.
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results.
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial
This DVD has 1,964 patterns published from 2007 thru 2016.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
You can view a video showing use of the DVD on a Windows PC and a MAC at this link
Click here to Order.
Click here to Order.
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video
Demonstration.
Ad: AffiliateWoodturner ins Multi-Roll Sanding Pack
These strips of sand paper are very handy for the scroll saw artist also. They are marketed to wood turners but have many uses. I use mine often to get into small fretwork areas. I fold them over to get into even smaller areas.
- Includes five rolls of J-weight, cloth-backed sandpaper
- Includes sandpaper in 150, 240, 320, 400 and 600 grits