Sunday, May 6, 2018

Musical Note Sculpture Scroll Saw Pattern.


Playing a musical instrument is one of the most popular hobbies/skills in the world. In the US alone over 21 million people play the piano. The guitar comes in a close second followed by the violin, drums, saxophone, flute, cello, clarinet, trumpet, and harp. 

This Musical Note Sculpture should look nice on a piano or in a music room.

Spray adhesive for applying patterns: 


When I apply a pattern to the wood I use spray adhesive. My process is to clean any dust from the wood. Apply either blues painters tape or Peel and Stick to the wood then affix the pattern with spray adhesive to the tape. I know others have different processes for applying patterns but I am sold on this method. Yes, I have tried every method there is.

In the picture above I have four different cans of spray adhesive. Some work better than others with my method. I want a permanent adhesive. I am not concerned about removing the pattern because the pattern is not glued to the board. It is glued to the tape. My main expectation for the spray adhesive that it does not allow the paper pattern to lift while I am cutting. 

The DURO brand on the left works well. The price is usually not too bad compared to some other brands. I used to buy it at Meijers but they stopped carrying it. It takes the glue a minute or two after the pattern is applied to become permanent. The pattern will slip around until it sets up. Sometimes this slipping is good and sometimes its bad.

The 3M GP 45 is my favorite. If you buy it on Amazon it is under $6 a can. If you order over $25 the shipping is free. That is easily the best deal of this bunch. The 3M 45 is permanent and dries fast. I almost never get any lifting of the pattern when I use the 3M 45. If you do not use tape under the pattern you will have a hard time removing the pattern from the bare wood. It is sticky stuff.

The smaller can of LOCTITE in the picture is useable but not great. I will get some lifting especially when the fretwork is small. It takes a little longer to setup after the pattern is applied. I would call it a permanent adhesive but not the best. It is also under $6 at Walmart. In a pinch, I will buy and use this spray adhesive.

The last can of LOCTITE on the right is useless for attaching patterns. It is what they call a middleweight bond. The lifting of the pattern makes cutting even larger fretwork difficult. It is also the most expensive of the four products above. It is over $9 a can. Don't buy this unless you want a repositionable pattern.

These are obviously not the only brands and types of spray adhesive you can buy. My point is that they are not all the same. You may need to experiment to find one that works well for you. My recommendation is the 3M General Purpose 45.

I inevitably get tons of email when I mention this process of applying patterns. I know some of you have your favorite method. Use whatever process that works for you. 


- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:


Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  



Every Scrollsaw Workshop Pattern from 2007-2017 in DVD
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has 2,300 patterns published from 2007 thru 2017.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing. 

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
http://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses who support our community.
Home of Pegas scroll saw blades.



Ad: Affiliate

3M General Purpose 45 Spray Adhesive, 10-1/4-Ounce


My favorite spray adhesive for applying scroll saw patterns.

  • Use for crafts
  • Use for light jobs around the office
  • Adhesive is ph neutral
  • It is a photo safe adhesive
  • Spray adhesive is an economical, industrial-grade, photo safe general purpose adhesive
  • Bonds together paper, cardboard, plastic, films, foam, and fiberglass insulation
  • Includes a 10-1/4-ounce aerosol can with an approximate 70 square-feet coverage