Tuesday, June 12, 2018

Dad's Shop Scroll Saw Pattern.



This Dad's Shop sign is ~ 14 inches wide. 

Quick Tip: Sharpen Your Scroll Saw Blade.

As you begin to cut more advanced scroll saw patterns you will run into the need for smaller interior entry holes. There are times when you need a drill bit that is slightly larger than the width of the blade. In the photo above I have a 1.4mm drill bit and a #5 blade that is 1.1mm wide.

This can make it difficult to push the blade through the hole, especially if you are a bottom feeder. To keep this from being a frustration you can sharpen the tip of the scroll saw blade. The sharpened tip will find the hole easier and usually slip right in. 

It does not take much effort to sharpen the blade. I just use a sanding drum to sharpen the tip. You can use a file if you have that handy.

One caution, do not overheat the blade if you use a sanding drum or grinder wheel to sharpen the tip. You could make the blade brittle and cause it to break more easily.

Order your custom 3D Name Pattern:

I am still taking orders for the custom 3D Name Plate Patterns. If you would like to place and order I will be happy to make the pattern. They are $5 per pattern. Here is the link to the order form.

3D Name Plate Order Form.

We had breakfast in The Castle. Not Scroll Saw Related.

Patty and I spent a wonderful morning at The Kentucky Castle. We were celebrating our 39th anniversary so we made reservations to have breakfast in this beautiful hotel/restaurant. 
The castle was built several decades ago as a home. Unfortunately, the couple divorced and the place stayed unused for many years. A couple of years ago it was finally purchased and turned into a hotel and restaurant.  
We have driven by the castle for 40 years and never had an opportunity to see what was behind the walls. We were curious. We were greeted at the back gate and welcomed by the very friendly staff.  
We both had a Belgium waffle. I had fresh fruit and a side a bacon. To say the food was good would be an understatement. It was excellent. The chef uses fresh locally grown ingredients as much as possible. I had a cherry jam that was made in house that was a real treat.

We went on a guided tour after breakfast that was interesting. The hotel has around 15 rooms for overnight stays. The four corner towers have all been converted to rooms for guest. The second floor of the main building has a few rooms. There is a ballroom for receptions and parties. The roof of the main building is available for events. 

They have an onsite garden for fresh vegetables. They even have a bee colony to produce honey. 

If you have an opportunity to pass through Kentucky you may enjoy a visit to The Kentucky Castle. 

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:


Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  



Every Scrollsaw Workshop Pattern from 2007-2017 in DVD
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has 2,300 patterns published from 2007 thru 2017.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing. 

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
http://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses who support our community.
Shop Bear Woods for your craft supply needs.
Home of Pegas scroll saw blades.



Ad: Affiliate

Delta Power Tools 40-694 20 In. Variable Speed Scroll Saw


This machine is currently on sale for $314.63. I feel like this makes this machine one of the best values around. 

  • Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
  • Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
  • Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
  • Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
at