Wednesday, May 15, 2019

Horse Art Scroll Saw Pattern.



This simple horse pattern is ten inches long and five inches tall. I have been receiving email lately asking for simpler patterns that can be cut from 3/4" thick boards. I kept this very basic. I used just enough veining to add some detail. There are only ten interior cuts.


Cutting Cupped and Twisted Boards:


In a perfect world, we would only cut flat and straight boards. Sometimes we may not have the option to flatten the board or we may not realize it is cupped or twisted before we begin cutting. When you have the option you should flatten the board first with a jointer or hand plane.

Twisted or cupped boards are difficult to cut. Even a small amount of cupping or twisting will cause the board to vibrate on the scroll saw table. If you don't notice the board is not flat you may assume the saw is just vibrating. Always check the board for flatness.

So, what do you do if the board is not flat?  All you have to do is choke up on the blade. Look at the picture above. Notice that I have both index fingers close to the blade. I am applying downward pressure as close to the blade as possible. 

Correct

You want to apply downward pressure to the board so it is in contact with the table where the blade goes through the board.  

Incorrect. This will vibrate badly.

$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:


Every Scrollsaw Workshop Pattern from 2007-2018 in DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but on an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.


Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shippingThis is a data DVD that you will use on your computer to watch the video tutorial  


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses who support our community.
Home of Pegas scroll saw blades.



Ad: Affiliate

ComXim 360 Degree Photography Turntable for Product Shooting


  • Knob control speed: the speed range is 20-68 sec/rev.(the maximum speed is 20 seconds per circle & the minimum speed is 68 seconds per circle)
  • On/Off switch control the direction.
  • Smooth and quiet rotations which make it convenient to display the products and take photos of the products.
  • Portability: diameter is 7.87in and the net weight is 0.6kg, convenient to carry and keep.
  • for display jewelry,glasses,bag,watch.