Click to Enlarge
Download the Pattern Below

Shadow the cat is ready to welcome the birds in your backyard to stay in his birdhouse. Maybe he is welcoming them to his belly. Either way, this is a fun project.

It is cut completely from 1/4" thick Baltic birch plywood. I used Titebond III water-resistant glue and small brad nails to ensure it can handle the weather. After the exterior paint cures, I will add three coats of spray acrylic inside and out.

Even with the waterproof glue I still added small brad nails for extra holding power. The box is assembled with slot and tab construction for extra strength.

I cut the hole 1.5" in diameter. That should handle many of the smaller backyard birds.

This is an easy-level project. None of the cuts are difficult and there are few interior cuts. It is basically a simple box with a cat glued on the front. The most difficult cuts are the slot and tab joints. Check their fit before you apply the glue. It is best to undercut slot and tab joints. You can always take a little more off if they are too tight.

My wife, Patty said this project is cruel and that I am warped. She might be right because I am looking forward to getting a photo of a bird's head sticking out of the cat's mouth. 😿

The photos look like the birdhouse is floating. The paint was still tacky and I did not want it to get paint in my light tent. It is just propped up on a small dish.

I used a simple rotating door for the clean-out access. Make sure the screw does not go all the way through. The birds could be injured so be careful.

Lots going on at Bear Woods.

Click to see all the great deals.
These are not affiliate links.

I have enjoyed my friendship with Stephen Dinesen for a few years now. Stephen is the owner of Bear Woods. I have watched him expand his product line with his customers in mind. If you have not visited Bear Woods in a while you may be surprised to see all the new products. Head on over and take a look.

I like doing business with people I feel I can trust. When I recommend a tool or supply item I want to know that you will be treated like a valued customer. That is absolutely what happens at Bear Woods by Stephen and his staff.

I have several of Bear Woods products in my shop and they are all quality tools. I own the Pegas scroll saw, a high-speed carving tool, a great shop stool, several of the Pegas blade chucks, Thousands of Pegas, and Niqua scroll saw blades, clock inserts and movements, hardware, and wood products. I even had the unique Pegas band saw in my shop for a while. It is impressive. They sell two-part epoxy that I have a gallon of in my shop. I have not used it yet but everyone tells me it is quality epoxy. Look for future projects using epoxy.

I mention all of these products because I have been pleased with all of them. Stephen absolutely does not stock any poor-quality products. When he is not knowledgeable about a product line he goes to the experts and learns.

One more thing that makes me happy to work with Stephen is his dedication to charitable efforts. He knows the importance of giving back to our community.

Take a few minutes and go check out what Bear Woods has to offer. If you don't need anything right now them remember to bookmark the web page so you will have it when you need something.

By the way. In my opinion, Bear Woods sells the two best brands of scroll saw blades. Pegas and Niqua(Flying Dutchman). Using high-quality blades is the number one thing you can do to make using your scroll saw more enjoyable.

Bear Woods

Click to Order

$12 per sheet of 12 coins plus $3.50 shipping

Inlay with a 1" Forstner Bit.

The perfect way to sign your work.

Video Demonstration Link

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.

www.scrollsawworkshop.blogspot.com

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2020 on DVD

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order.

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.

Buy Now.

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated.