Sunday, April 11, 2021

Deer Mount Scroll Saw Pattern.



Click to Enlarge
Download the Pattern Below

Important, please read: This pattern was not originally designed by me. It is a laser pattern that was made freely available. I modified it to be used on the scroll saw. I do not have permission for you to sell the finished project made from this pattern. It was made available for personal use. Please respect the original designer and not sell the project.

After I modified this pattern to be cut from 1/8" thick Baltic birch plywood, I used one of my lasers to do the test cut. That is why you see the burnt edges. This pattern can be easily edited for use on your laser. 

This will not be a difficult pattern to cut on the scroll saw. It can be made even easier by stack cutting two at a time. 1/4" is easier to cut than 1/8".

One note about this project is that the only glue I used is on the two parts of the shield and I glued the neck to the shield. All the rest of the pieces are just slid together. You can use glue but if your joints are tight enough and can skip the glue.

I added slots and tabs on the back of the neck and the shield for a better glue joint. 

One funny thing about the project is my city boy ignorance. I could not decide if the two forward-facing antlers should go forward or backward. The original did not show the completed project. I looked at a few real dear antlers and finally flipped them to face forward. I think that's correct. ðŸ¤”

Free Pattern from Sheila Landry Designs:

Click here to visit the download page

I was speaking the Keith over at Sheila Landry Designs. He asked me if I would share their current free pattern. I am always honored when they allow me to share their projects. Guys, these are two of the nicest people in our community. On top of that, they are two of the most talented pattern designers. If you have the means, please support them and their work. Thank you.

Free Scroll Saw Pattern Sample
We hope you enjoy this “Springtime Chicks” free pattern sample… Sheila had a lot of fun creating this one! We hope this will familiarize you with our detailed step-by-step instructions and crisp, clear line work that is provided with our patterns.

If you like this project, we have one for every season. You can find those and Sheila’s other stand-up word designs here: https://sheilalandrydesigns.com/scroll-saw-pattern-category/scroll-saw-word-art/sheila-patterns/


While you are visiting Sheila and Keith's site make sure you check out their other wonderful projects. Like these beautiful Christian Standing Word Art pieces.
 



$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2020 on DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.


for you scroll saw ready boards.

Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill


 
Affiliate Ad

Wood Burning Deluxe Starter Kit


One creative tool that goes very well with the scroll saw is a nice wood-burning tool. Many scroll saw projects can be taken to a new level utilizing pyrography. The cheap wood burners that you get for under $50 at craft stores are difficult to use because you can't control the temperature.

The Colwood units sold by Bear Woods are fantastic. I have owned one for a few years and enjoy it a lot. Temperature control makes all the difference in the world. With the correct temp and wood combination, it feels like drawing with an inkpen.

Get started burning with Colwood's original unit and top seller. This time-tested tabletop design features a lighted on/off switch, a terminal barrier for strong connections but easy cord changes, and a handpiece clip on the top. This deluxe kit includes a replacable tip handpiece, tip puller cleaning cloth, honing paper, tip case, and the standard tip package: 1/4" skew (B), writing tip (C), 3/16" small round (D), 1/8" tight round (J), 3/16" shader (S), 5/32" small point (K), micro writing (MC), 3/32" micro rounded heel (MR), and 1/8" small calligraphy (C1).

This pack includes:
WB-DETAILER - The Detailer
WB-21 - Deluxe Tip Package
WB-03 - EZ Tip Puller
WB-02 - Replaceable Tip Handpiece
WB-04 - Cleaning Cloth
WB-05 - Honing Paper