I am showing an optional inlay technique for these coasters. It takes a little work but the technique is not very difficult. We are going to use sawdust and CA glue as the hardener.
You are going to need a cup or two of sawdust so hopefully, you have a shop vac or dust collector that has not been emptied.
The inlay looks a little like cork but it is very hard to the touch.
Cut the pattern and cover the bottom of the board with blue painter's tape to make a reservoir.
Fill the cutouts with fine sawdust. Level off the sawdust. You may need a second layer after the fist layer cures.
Saturate the sawdust with medium CA glue. Let the glue cure for a few minutes then hit it with the activator. Flip the board and carefully remove the tape. Repeat the process for the second side.
You will see smoke once the reaction begins. It will get hot to the touch. Do not breathe the fumes. Work in a well-ventilated area.
Now for the fun part. Sand both sides until the sawdust is flush. If you have gaps then repeat the process of filling in the gaps.
This is an experimental process that I have only just tried once. I believe the inlay is pretty secure and bonded to the board but time will tell. I may experiment with using dye to color the sawdust before I use it for inlay. Let me know if you come up with any creative ideas
If this is not a technique you want to try then an Epoxy inlay or Polymer clay inlay are options. If you are real bold you could try the double bevel scroll saw inlay.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2020 on DVD
This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Make sure you check out the Seyco Scrollers Drill