This toddler chair is 20.5" tall and 11" wide. It is cut from 1/2" thick plywood. I was able to cut it entirely on a 21" scroll saw. You have to plan your cuts but they will fit.
The pattern is broken up because of the size. You need to cut the pattern and tape it together to get the full size.
You want to use a decent quality of plywood so you don't have to deal with too much tear out. Prime and paint will add a nice touch. Sand all the edges well for a smooth touch. It you have a router you might even consider a small round over to all the edges that get touched.
If this pattern gets enough response I will go back and design a simple desk.
.gif)
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Over 3,900 Digital Pattern Books. Many with multiple patterns.
Every Scrollsaw Workshop Pattern from 2007-2022 on USB drive, or Instant Download. Over 3,900 Patterns!
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.You will never run out of fun patterns to cut.
Two delivery options.
After payment, you will receive an email with the download link. This is a large file. You should not attempt to download it on a tablet or smartphone. It is a compressed file that will need to be extracted to your hard drive. Basic computer skills are necessary to extract the file.
The USB drive will be shipped to the US only by first-class mail. Shipping time varies but you will get a tracking number. I normally ship within three days. USPS shipping normally varies from three days to a week.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Make sure you check out the Seyco Scrollers Drill
xTool D1 Laser Engraver, 5W Ultra Accurate Laser Engraving Machine, 36W DIY Laser Cutter Support LightBurn, Laser Engraver for Wood and Metal, 17'' x 16''
My Note: This is the 5W output laser. It will cut very thin material but would be considered mostly an engraving tool. Paired with a scroll saw this laser works great. Cut with the scroll saw and personalize with the laser.
You May Be Wondering - 5W is laser output power, which figures measure the capability of the machine to cut and 36W is the machine power of the laser machine
Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images
All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 Laser engraver more stable with less noise and 3 lifetimes longer than similar products
Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 6mm wood board and a 3mm black acrylic in one pass, smoothly cutting surface with fewer burn marks
Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver
Make Your Creativity a Breeze - xTool D1 5W is the ideal and user-friendly laser engraver for beginners to start off with, like making greeting cards, patterns-engraving, and your personal artwork
Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you
Professional Support - We have a professional US technical team and support website to solve all your problems within 24 hours