Two Patterns Today
Second Pattern Today
.gif)
This is a small workbench storage unit. The depth is 10.25" and the height is 7". The drawer is 2" deep.
The space to each side of the center divider is a little over 3.5" wide and 10" front to back. All the parts are cut from 1/4" plywood.
Remember that much of the plywood sold is not 1/4" thick. Measure your plywood thickness and adjust the slots as needed. To be honest, I never measure the plywood. I just hold it up to the printed pattern to see the difference. Then I undercut the slot's width by eye. That is almost always good enough. If the slot and tab are too tight after I cut then I just take a bit more off.
If you are using a laser to make the project then it is more important to get the slots width correct. Some of the laser driver software allows for this adjustment. If that is not helpful then import the pattern into Inkscape and adjust the slot width.
The height of the drawer is exactly to spec so it may be a tight fit in the case. If that is the case then sand off a little on the top.
Simple Bowl/Basket:
The Basket/Bowl is 6.5" in diameter. You can adjust the height of the basket by adjusting the thickness of the rings. The one pictured above has 1/4" thick rings. This is a relatively easy pattern to cut. If you have trouble cutting circles remember that they can be adjusted after they are cut using a disk sander.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Storage Pattern
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Over 4,300 Digital Pattern Books. Many with multiple patterns.
Every Scrollsaw Workshop Pattern from 2007-2023 on USB drive, or Instant Download. Over 4,300 Patterns!
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.You will never run out of fun patterns to cut.
Two delivery options.
After payment, you will receive an email with the download link. This is a large file. You should not attempt to download it on a tablet or smartphone. It is a compressed file that will need to be extracted to your hard drive. Basic computer skills are necessary to extract the file.
Click this link to order the USB Drive
The USB drive contains all the Scrollsaw Workshop Patterns. The drive is $25 plus shipping and handling. Now with the new distributor the drive ships to the US and many other countries. The shipping can get expensive to some international locations so the Instant download option above is probably more desirable.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Make sure you check out the Seyco Scrollers Drill