This fretwork basket will give you some practice in stack cutting. The ends and sides can be stack cut to save time. The one pictured was cut from 1/8" thick maple. I also included a pattern that is twice the size you can cut from 1/4" thick stock. I did not test cut the large basket. You might have to taper the bottom edge of the side pieces to get a good fit with the bottom. The small basket 5 1/2" long and 4 3/4" tall.
The construction is slot and tab so it goes together easy with no complicated clamping. It's best to cut the slots slightly under size and file them for a snug fit.
