This is a technique that can have nice and simple results. The little Nativity scene is made with a bevel cut. This allows the pieces to stick out from the background without coming all the way out. In this example I used 3/4" wood and set the table to about 3 degrees. This let the pieces protrude about half way. The neat thing is that the grain of the wood runs through out the piece uninterrupted. Even the grain of this poplar looks neat here.
You want to make a few test cuts to see how far the pieces come out. If they come out too much increase the angle. If they don't come out enough decrease the angle.
If you want the pieces to stay in place use a little hot melt glue. You can also just push them out when you display the project and push them back in for storage.
The picture below is just so you can see the back for a better understanding of the project.
I need to apologize to many of you for not responding to your email sooner. As the blog continues to grow the email is growing also. I truly appreciate every email and want you to keep them coming. Please just understand that replying to as many as 100 emails a day can sometimes overwhelm me and I get way behind. Most of the time it's only around 20 and I don't have trouble. The good news is that I read all of them and get lots of great ideas and that makes what I do easier. This is a good problem to have. October was a record month with over 67,000 visitors. Thanks for sticking with me.
Below is a graphic of the blog growth in visits per month. I know this won't be very interesting to many but I just wanted to say thanks to all of you for helping me grow the hobby of scroll sawing.
Make A Donation
