"You Me Infinity Hearts Candle Holder Scroll Saw Pattern.

I want to thank all the members of the Dallas Ft. Worth Scrolers Club in Irving TX. I appreciate your kind support of the Scrollsaw Workshop. 

If anyone is in the Irving area and would like to join a group of dedicated scrolers, they meet the last Saturday of each month from 9:30 to 11:00 am at the Georgia Farrow Recreation Center. Check out their website for more details. The next meeting is February 24. 

This small candle holder should make a nice Valentines Day gift. The infinity hearts need to be as smooth as you can cut them. Errors cutting the curves will stand out. Just take your time and remember sand paper is your friend. Sand away any mistakes.

The brass candle dish I used in this project is actually a sliding door finger pull sold at hardware stores. They are available at Home Depot for under $1. A reader sent these to me a few years ago and I am just now using them. They work good for this type of project. I apologize that I con't remember her name to give her credit. 

You can cut a hole in the base to install the brass dish or you can cut the wooden ring in the pattern and install the dish in it. The brass finger pulls have barbs on the edges to grab the wood and keep them from coming out. 

I glued the wood ring to the base then installed the brass dish.

Click Image to Enlarge and see contest details.

Click to Enter the Giveaway

Click to visit Bear Woods Facebook page and enter your photo.

January's 2WAYS2WIN contest had great participation so Stephen at Bear Woods and I want to do it again. The theme this time is Planes, Trains and Automobiles. If you would like to have extra entries follow WAY2WIN #2.

WAY2WIN #1: Click the link above and enter the giveaway. That simple. Enter everyday.

WAY2WIN #2: Post up to three photos of your wooden trains, planes or automobiles on the Bear Woods Facebook page. You can also just email your photos to service@bearwood.com.

This is not a review. This is an Ad:

Affiliate Ad. Click to Purchase

The spindle sander is a valuable tool in any scroll saw workshop. It's what I call my ut-oh fixer. If you have trouble cutting a curve this can fix the bad spots. I will usually leave the pattern on the wood after I finish cutting. Then I take the wood to the spindle sander and sand to the pattern line. Errors magically disappear. 

I have the Ryobi version of this machine. It's no longer sold but this WEN gets very good reviews also.    

If you are interested in buying this tool please consider using my Amazon affiliate link above. Your price stays the same and I get a small kick back. Thanks for your support.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Please support our monthly giveaway sponsor. Bear Woods,
your source for Pegas scroll saw blades and craft supplies.

Visit Heritage Wood Specialties
for your scroll saw ready boards.

Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 

Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.

The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has 2,300 patterns published from 2007 thru 2017.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order. 

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing. 

Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

Jesus with Lamb Scroll Saw Pattern.

 The first thing you need to do before trying to cut this pattern is square up the blade. The interior cut-outs produce some very thin runs of wood. You want these cut evenly or they will break.

You can cut slightly outside the pattern line along these thin runs if you are worried you will cut through them. 

While you are cutting pay attention where you place your fingers. You don't want to push on these thin sections and break them. 

You can see from the picture below that I cut out and installed an acrylic cover. I did this to protect the fretwork and I think it looks cool. You can't see it in the photos very well but it gives the project a very high gloss look.

Install a saw-tooth hanger on the back to make it a wall hanging or just display it on a shelf.

This short video from Bill made me smile. :)

Click to Watch the Video.

Bill Y. sent me this video today. He built the hammer door knocker I posted the pattern for the other day.  It made me smile si I thought I would share it. Thanks Bill.

Let's start another Giveaway:

Click Image to Enlarge and see contest details.

Click to Enter the Giveaway

Click to visit Bear Woods Facebook page and enter your photo.

January's 2WAYS2WIN contest had great participation so Stephen at Bear Woods and I want to do it again.

WAY2WIN #1: Click the link above and enter the giveaway. That simple. Enter everyday.

WAY2WIN #2: Post up to three photos of your wooden trains, planes or automobiles on the Bear Woods Facebook page.

I will try to do a couple of patterns that you can build and enter in the giveaway. Remember this is not a contest. It is a giveaway. Your entry on Bear Woods Facebook page will not be judged. It is just an eligibility requirement for that part of the giveaway.  

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Please support our monthly giveaway sponsor. Bear Woods,
your source for Pegas scroll saw blades and craft supplies.

Visit Heritage Wood Specialties
for your scroll saw ready boards.

Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 

Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.

The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has 2,300 patterns published from 2007 thru 2017.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order. 

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing. 

Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

Ad: Affiliate

INCRA Miter1000/HD Miter Gauge

I have used this miter gauge for a few years and I can recommend it without hesitation. Great piece of hardware.

• 180 Angle LOCK Indexing Stops with 1-Degree Step Spacing and Special Stops at ±22-1/2-Degree
• Patented Glide LOCK Miter Bar Expansion Disks Provide a Perfect Fit
• Heavy Duty Machined and Laser Cut Components. Patented Incremental Flip Shop Stop for Prefect Cut Length Control
• 1/10th-Degree Vernier Cursor, Telescoping Fence Expands from 18-Inch to 31-Inch Overall Length
• Removable Retaining Clip for T-Slot Miter Channels