This bird art is eight inches tall. There are three 1/4" thick layers.
If you have a difficult time cutting the curves, try this. Cut just outside the line and use a belt or disc sander to sand down to the line.
Quick Scroll Saw Tip:
Large board on the scroll saw
There are two ways to feed the blade through the starter hole in the board. You can feed it from the top down. Called a "Top feeder" or from the bottom up called a "Bottom feeder". It's best to learn to use both techniques.
When the board is large it is difficult to find the hole when you are bottom feeding. Some people prefer to bottom feed all the time so this is a problem. There is a simple trick that makes bottom feeding easier on large boards.
Lay a small mirror in front of the blade. You may also need a small light to the side.
Mark the problem holes with a pencil. The holes closer to the edges are not normally a problem.
Now, when you place the board over the blade you can see the blade and hole in the mirror. It takes some practice but you can learn to thread the blade through the hole without even touching the blade. Just lay the board down where the two meet. This is easier than getting down on the floor and looking up.
In the long run, you will benefit from learning to top feed to solve this problem. Habits can be difficult to change so if bottom feeding is your thing then give this tip a try.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Over 3,600 Digital Pattern Books. Many with multiple patterns.
Every Scrollsaw Workshop Pattern from 2007-2021 on DVD, USB drive, or Instant Download. Over 3,600 Patterns!
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.You will never run out of fun patterns to cut.
Three delivery options.
After payment, you will receive an email with the download link. This is a large file. You should not attempt to download it on a tablet or smartphone. It is a compressed file that will need to be extracted to your hard drive. Basic computer skill are necessary to extract the file.
The USB drive will be shipped to the US only first-class mail. Shipping time varies but you will get a tracking number. I normally ship within three days. USPS shipping normally varies from three days to a week.
The DVD is manufactured and shipped by my distributor. They ship to several countries but not all. Check their shipping list to see if your country is supported.
Here is a quick video showing you what you will get when you purchase the offline Scrollsaw Workshop Catalog
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Make sure you check out the Seyco Scrollers Drill
WEN 6524 Oscillating Belt and Spindle Sander
About this item
- Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt
- Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
- The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke
- Onboard storage maintains organization of all accessories and sandpapers
- Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)
