Another Custom Clock.

A reader sent me the idea for this clock. Turns out you can disassemble clock inserts and replace the paper dial with a custom one. That fits right in with what I have been working on for my custom paper dial project. All I had to do was re-size the the dial smaller and I was all set. I designed a very simple clock to hold the insert so the picture would be the star and not the wood body.

I used a 3 1/2" clock insert I had in the shop which happened to have a 3 inch paper dial. Apparently that is a common size for the paper dial but you might need to shop around. I think the clocks at this link will work. If someone could verify that for me I will pass on the info to everyone.

I printed the custom dial on gloss photo paper and cut it out with scissors. You will need a 1/4" hole in the center. I used an Exacto knife for that. I just disassembled the clock and and glued the new dial in place.

When I get my custom paper dial order form set up this size dial will be included so you will have the option of building this style clock. I'm still a few days away from having everything ready to take orders but I moving forward at least.

Thanks to Michael Moreland for passing this tip on to me. He saw the project done on the Scroll Saw Woodworking and Crafts message board.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation