Trammel Scroll Saw Pattern.

Click Image to Enlarge.

I am on a woodworking jig kick the last few days. The download percentage for the benchtop saw horses and the miter joint clamp were very high. I thought I would do another jig today. Back to our regularly scheduled programming tomorrow. 

I'll be honest, I normally just throw together a 2-minute tramel by taking a board and drilling two holes. I just make it for the size I need for that project. I throw it away after the project is complete. I wanted one I could keep and would be adjustable. 

You don't want to make the tramel larger than you will likely need because it gets difficult to use for small circles if it is too long. It is better to make two lengths of the shaft and just use the long one when needed. This one is just about the right size for most circles I need. 

This trammel will draw a circle from 6 inches to 20 inches. It will actually go down to about 3.5 inches but I just marked the scale to 6 inches. This can be easily modified to make any length you think you may need. Just extend the shaft and slot.

A trammel has several uses in the workshop from tabletops to bowl blanks. 

I included an easy to hold handle. The pivot point is a 2-inch nail.

You can use a trammel to draw complete circles or arcs. 

I use a 1 inch bolt and wing nut to secure the pencil holder to the tramel. A small wood screw helps hold the pencil in place. The pencil hole is drilled to 19/64" which is a snug fit for the pencils I use. Drill the hole to best fit your pencil. 

Click to Order

$12 per sheet of 12 coins plus $3.50 shipping

Inlay with a 1" Forstner Bit.

The perfect way to sign your work.

Video Demonstration Link

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2018 in DVD

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order. 

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but on an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.

Buy Now. 

Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 

Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.

The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

My Sponsors:

Support the businesses who support our community.

Shop Bear Woods for your craft supply needs.

Home of Pegas scroll saw blades.

Visit Heritage Wood Specialties

for you scroll saw ready boards.

Ad: Affiliate

Kreg K5 Pocket-Hole Jig

When it comes to joinery the Kreg pocket hole system is one of my favorites. I don't do a lot of furniture building but I still use my Kreg pocket hole system quite often. A couple years ago I built a set of built-in shelves that covered an entire wall and I used the Kreg pocket hole system for the build. It saved me hours.

I use it when I am building shop projects. It is fast and super strong. I consider it a must-have for my woodworking shop. I have the older system but I really want to upgrade to the new K5. I probably will upgrade after the first of the year.

• The new Kreg Jig K5 is packed with features your are sure to appreciate
• It comes with a convenient front-mounted clamping handle, and it's connected to a ratcheting clamp mechanism that adjusts without tools or lock nuts
• The quick-release Drill Guide Block makes set up simple
• Front-mounted clamp handle makes clamping easy
• Ratcheting clamp mechanism adjusts without tools
• Quick-release pin holds drill block in place, and can't get lost
• Storage Wings provide built-in storage for bits, screws, accessories
• Stop-Collar Setting Block makes drill bit setup easy