Click to Enlarge.
Note: I was informed that yesterday's Mallard pattern was incorrect. The reader told me that those are Wood Ducks. I am so city that I'm lucky when I recognize a cow. I have no idea what the difference is between a mallard and a wood duck. Anyway, I wanted to apologize to all the wood ducks out there.
Today's pattern is named Birds in Love. Kinda mushy but that's the best I could come up with. :)
There are two parts of this pattern that I can give tips for.
The veins in the leaves will be easier to cut with a spiral blade. You can use a flat blade but you will have to be careful making all the turns. The good news is that if you stray off the pattern no one will notice.
The flower in the bird's mouth will be delicate until it is mounted to a backer board. As always, cut the interior of the flower first. Save the large interior cur area around the flower for the last cut. When you remove the waste from the last cut, do it very carefully. Remember that glue is your friend. If it breaks just clue it to the backer board and no one will know the difference.
Scroll Saw Sanders:
For some reason, I have received a few questions about scroll saw standers lately. Someone must have them on sale. In general, they have wanted to know what I think about the product.
For those of you who may not have seen these sanders let me explain what they are. They are small strips of sandpaper with plastic retainers. They are installed on your scroll saw in place of the blade. Once installed, you can start the saw and move the piece that needs to be sanded into the sandpaper while it is moving up and down.
Do they work? Well..... kind of. They do install in the saw and they do sand wood. The question for me is how useful are they. I have spoken to a few scrollers who like and use the sanders. Many of them use the sanders to contour the edges of small intarsia pieces. For me personally, they are just too inefficient and slow.
The strips are often too large to get into small interior cuts. You are pretty much limited to large interior cuts or the edge of the board. Even in those cases, I think it is easier to use sanding sticks or folded sandpaper by hand. I will sometimes, sharpen a popsicle stick and glue sandpaper on the end.
This lets me get into some tight spots.
I have nothing against using the scroll saw sanders. They do what they are advertised to do. If you have limited space in your shop then maybe they are a nice option. Even though I rarely(never) use them, I do have some in my shop for that time when that they may come in handy. That time has never happened yet but you never know.
By the way. They are relatively easy to DIY. A four-pack is only around $7 so making them won't save you much. You can make some just to see if you like them enough to purchase.
Here is an instructable.com link that shows making a scroll saw sander. His method does not make a flexible strip but it works for some cases.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2019 on DVD
This DVD has over 2,900 patterns published from 2007 thru 2019.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Ad: AffiliateMy favorite scroll saw blades.
Everyone has their favorite brands. When I shop for scroll saw blades I stick with the Pegas brand. I find them to be sharper and longer-lasting than other brands. I especially like the Modified Geometry blades by Pegas. The cut very true with less drift.
If you are looking to make your saw better then good scroll saw blades just might do the trick.
