Sunday, July 29, 2018

Wolf Pack Scroll Saw Pattern.


Wolf Pack. This pattern is 11" X 14". 

There is a small town outside of my home city named Nicholasville Ky. They have a population of just over 30,000. This week I have spent quite a bit of time in Nicholasville. I have been visiting the Jessamine County Public library. 

The Jessamine Co library is the closest maker space to my house. I needed access to a laser engraver and they have one. The tube in my laser died and I have orders to fill so I needed a backup. I am ordering a new laser Monday but that was not going to get my orders out in time.

I just want to talk about the experience for a few minutes. I had to take an orientation class that went over the basic rules and procedures. They briefly discussed the equipment they have available and answered a few questions.

After the orientation they had you sign up for individual classes on the individual machines. They have the laser engraver, two CNC machines, multiple 3D printers, an audio/video recording studio as well as other accessory equipment. 

To say this place is impressive is an understatement. I was in tech heaven. Access to the machines is free and they even supply some supplies. Did I say wow yet?

The class that I needed to take to be able to use the laser was a few days away. I did not have that kind of time so I ask the young man in charge of the lab if I could use the machine since I already had lots of experience. He asked me a few questions to see if I actually knew what I was doing and signed me off. The guy was friendly and knowledgeable. He was there to help and he did.

The room with the laser also houses the two x-carve CNC machines. In the three days, I have been working there only a couple people have come in to use the machines. I have had almost unlimited access. They normally schedule time in hour blocks but allow you to keep working if no one else is in line. One day I was there for almost eight hours and they were fine with that. 

The only downside to this incredible facility is that they can only give people basic training. Laser engravers, CNC machine, and 3D printers are complex machines. To have success you need considerable experience. 

I was there when a small group of people were trying to use the CNC router to cut out the shape of Kentucky from plywood. It was a basic job for a CNC but they were not having much success. They wanted to produce a product but did not have the knowledge to do so with a complex machine like a CNC. They gave up. I offered to complete the job for them when I get back from Iowa next week and they were thrilled.

The problem with them trying to use the lab was that they wanted to create something. They were not really looking to learn. These maker space labs are for learning more than making. I just wish I had seen more people taking advantage of this wonderful facility.

I ask them if they would like to add a scroll saw to their lab if I could get one donated to them. They were interested so I am going to make that happen when I get back next week. Then I'll volunteer some time to do training for the staff.

The scroll saw is not as tech sexy as the laser or CNC machine but I can teach someone to use a scroll saw in a few minutes. To teach these other machines takes hours. It will be interesting to see how much the scroll saw gets used compared to the other equipment. I know one thing for sure. The people who were having a tough time with the CNC today would have loved to have the scroll saw there. I bet they would have left with a finished cutting. They left with some torn up plywood.

I am telling this story to let you know these facilities are starting to be more common. Look for them in your library or check to see if a maker space has opened in your area. They are wonderful places to learn about these machines.

Exciting News. We have another giveaway for this month.


Stephen over at Bear Woods recommended that we do a giveaway in conjunction with the Midwest Scroll Saw and Woodworking Trade Show. You do not have to be at the show to win.

We will have three winners.
#1 will receive a $300 gift certificate from Bear Woods sponsored by the Scrollsaw Workshop
#2 will receive a $150 gift certificate from Bear Woods sponsored by Bear Woods.
#3 will receive an incredible scrolled piece of art by Charles Dearing. This artwork will be cut live at the show. After the show, it will be packaged and sent to the winner. You will love this artwork.

The contest is open to the world. Enter once per day.
The entries will end 7/31/2018 at midnight. Winners will be drawn during the show.
We will try to stream the drawing live if we have a decent internet connection.

Signature Coin Orders: 

As related in the story above I am working to get all the signature coin orders out before I leave for Iowa next week. I am on track to get them all finished. If you want to place an order now that's fine but I may not get to them until I return from the Midwest Scroll Saw and Woodworking Tradeshow.


- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:


Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  



Every Scrollsaw Workshop Pattern from 2007-2017 in DVD
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has 2,300 patterns published from 2007 thru 2017.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing. 

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
http://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses who support our community.
Home of Pegas scroll saw blades.



Ad: Affiliate

DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw


The DeWalt is probably the most popular scroll saw ever. This yellow machine can get the job done. I have owned two of these machines. One I gave away and the other one is still in my shop and running well. It's 12 years old. If you are looking for a good, reliable saw then consider the DeWalt DW788.

  • Double parallel-link arm design dramatically reduces vibration and noise for extremely accurate cuts
  • Exclusive tool-free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 in
  • On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever all located on front upper arm
  • Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
  • Arm lifts so blade can be easily threaded through the material for inside cuts

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

http://www.stevedgood.com/catalog/

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click her for the Free Online Catalog.

-

Wooden Vases on the Scroll Saw Book $12 Each

http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
http://www.stevedgood.com/swpd/swpdorderpage.html
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.
Download the Free Oval Key Chain Pattern Maker. Create Oval key chain patterns in seconds.
Download Version .9a
Please consider a $5 donation for The Oval Key Chain Pattern Maker.

T-Shirts and More.

T-Shirts and More.
Show your love for the hobby and support the Scrollsaw Workshop. Safe and secure order fullfilled by CafePress. Take a look. You are sure to find something you like. CLICK THE IMAGE to visit the store.

The Lifter

Papa's Custom Patterns.

www.papasworkshop.net

Philip Lowndes Noah's Arc Pattern Available. Watch the video below.

This video is from Philip Lowndes. He is the designer of this beautiful Noah's Arc puzzle pattern. If you would like the pattern follow the link below.
Buy This Wonderful Heirloom Puzzle Pattern

Think Safety

Remember to keep the safety of yourself and others in your work shop in your thoughts at all times. Always wear eye and ear protection. Follow all the manufactures warnings that came with your power tools. If I demonstrate something on this web site that you don't feel is safe, don't do it. Your safety is your responsibility. Fingers are handy things, try to keep all of them.
__________________________
Disclaimer:
The Scrollsaw Workshop Blog is in no way affiliated with or sponsored by Scroll Saw Woodworking and Crafts Magazine formerly (Scroll Saw Workshop Magazine) or it's publisher Fox Chapel Publishing.

Scroll Saw Woodworking and Crafts