Tuesday, January 19, 2021

Happy Place Word Art Scroll Saw Pattern.


 
Hanging Word Art with Backer board
 
Free Standing Word Art.
Click to Enlarge
Download the Pattern Below

Let me start out by saying that I saw a project very similar to this online. I used a different font and rearranged the characters but it is not an original idea of mine. I liked the phrase because I consider my shop my happy place. 

I think we all have a place where we feel the most content. I can see this word art hanging in a kitchen, sewing room, craft room, TV room, and for a bit of humor, the bathroom. Heck, there may even be a few of you who take it to work. 

The pattern comes in two sizes. You can use the backer board if you wish to hang the word art or you can just make it free-standing.

Personalized Signature Coins. Sanded or Not Sanded? More Information:

Click to Enlarge
The coins have two very small tabs that hold them in the sheet. Just twist to remove

The most common question is about sanding the coins.

When I laser Engrave the Personalized Signature Coins for customers I do not sand them. I have had customers say they like the distressed look of the un-sanded coins and some who don't. I also want to keep the price as reasonable as possible. A sheet of 12 coins is $12. Sanding would add considerably to the price and I don't want that to happen.

To make sure you can have them the way you like, I make sure to engrave the coins deep. This leaves room to sand with 220 grit paper and still have a nice engraving. I have gotten better over the years at getting the engraving sharp and deep. There is room to sand.

If you are new to the Scrollsaw Workshop you may not be familiar with my Signature Coins. Watch the video below to see just how much they add to your projects. Some of your work will be in your family for years. It's nice to have a  permanent signature on the back of your projects so the next generation will know who made the heirloom. 

These coins will cost you a few cents over $1 for each special project. 


  
The signature Coins are inlaid into your project using a 1" Forstner drill bit. Find a spot on the back or bottom of your project. Drill a 1" hole, 1/8" deep, and the coin can be glued in place. A drill press is handy but you can do it with a hand drill if you are careful. I like the coin to be flush with the surface but it's fine to slightly recess the coin.




$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2020 on DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.


for you scroll saw ready boards.

Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill


 
Ad Affiliate:

WEN 3959 2.5-Amp 9-Inch Benchtop Band Saw


About this item

  • 2.5 amp motor rotates the blade up to 2500 feet per minute
  • Create cuts up to 3-1/2 inches deep and 9 inches wide
  • Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
  • Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees
  • Includes a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge, and a two-year warranty

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.