Tuesday, December 1, 2020

Infinity Heart Box Scroll Saw Pattern.

Download the Pattern Below

This is a small 3" box with an infinity heart design on top. I made this one 1.125" deep. You can use as thin as 3/4" thick but over 1" is better if you have it available. The box will mostly be used for rings and other small jewelry. 

I did make a mistake when I chose the wood for this project. I used cedar for the infinity heart decoration. The lumpy grain of the cedar makes the decoration look poorly cut. If I were going to gift this box to someone I would remove the decoration and use maple. Cedar cuts easily but was not a good choice for a small decoration.

If you have not seen this style of box before you will notice that the walls of the box are cut from a single board in concentric circles. This means that the cuts need to be at right angles to the saw table or the walls won't slide together smoothly. Take your time and use a new/sharp blade. You can also take out some of the warped cuts with sanding. 

If you look at the photo below you will see where I drilled my entry hole to separate the inner and outer walls. Obviously, this hole needs to be small. This is a good place to have micro drill bits. The smaller the hole the easier it is to sand away the evidence. 

Coupon Available for 15% off at Sheila Landry Designs:

Keith from Sheila Landry Designs email me today. He wants me to let everyone know that they have a coupon available for 15% off. If you are looking for some beautiful patterns to make as Christmas gifts, now is a good time to check out what they have to offer.

Use the coupon code is SAVING15. It is case sensitive. When you get ready to check out just put this code in the coupon code box and you will get the discount.

Sheila Landry Designs

Personalized Christmas Ornament Patterns are ready to order:

I am ready to start taking Personalized Christmas Ornament Pattern orders.

I can do first or last names but remember that more than ten letters will be more difficult to cut.

The order form will take up to 20 names for people and 5 names for pets. If you need more than 20/5 then start a second order.

You will not pay until you have the patterns and are 100% happy with them. There will be an invoice sent with the patterns to your email. You will have the option to pay securely with a credit card or send a check to the included address.

I am shooting for a three-day turnaround but that may be difficult for a few days until I get all the kinks worked out. I'll do my best. You can set a bookmark for each of the order forms but I will post them almost every day until Christmas.

$1 per/name with a 5 name minimum.

$2 per/name no minimum. 

$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2019 on DVD

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,900 patterns published from 2007 thru 2019.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.

for you scroll saw ready boards.

Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill

Ad Affiliate

DEWALT Scroll Saw, Variable-Speed, 1.3 Amp, 20-Inch (DW788)

The reduced price of $379 is still available on Amazon.

About this item

  • Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
  • Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
  • On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
  • Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
  • Arm lifts so blade can be easily threaded through the material for inside cuts

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!

Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!