Thursday, March 7, 2019

Cookbook Stand with Kickstand Scroll Saw Pattern.




I decided to stay with the kitchen accessory theme today. This is another very simple pattern to cut. There are a total of four interior cuts. The joinery is a simple butt joint. Today's glues are strong enough to hold these parts together. You can add some hardware fasteners if you feel they are needed.

I used the tip from the other day when gluing up the parts. I used both wood glue and CA glue plus activator. This gives me the advantage of a quick set from the CA glue and stronger bond of the wood glue.


The kickstand uses a small brass hinge, two eyelet screws, and string. 


Works with cookbooks.

.
Works with digital devices.

Brass Screw Tip: 


Small brass screws can be difficult to install. It can be easy to damage the head of the screw when driving them into the wood. There are a few tips that will make the process much easier.

Apply a small amount of soap to the first couple of threads of the screw. This will make the screw much easier to drive.

Use the correct drill bit to drill the starter hole. When you drill the hole don't drill to deep. Leave the hole a couple threads short. The gives you a good starter hole and also leave a little solid wood for the screw to grab.


Use the correct screwdriver. This is one of the most common mistakes that cause stripped or broken screws. Buy a complete set of screwdrivers. The tip should fit all the way into the screw head and have complete contact with the slots in the screw.


Drive all the screws leaving them short of fully installed. After everything is lined up then drive the screws tight. You do not need too much torque. Once the screw is set, stop. No muscle here. Brass screws do not like muscle.

$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:


Every Scrollsaw Workshop Pattern from 2007-2018 in DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but on an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.


Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shippingThis is a data DVD that you will use on your computer to watch the video tutorial  


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses who support our community.
Home of Pegas scroll saw blades.



Ad: Affiliate

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG



  • 3-Directional Force for Unmatched Control of the Work piece
  • Moving-Blade-Guard Hand Protection
  • Precise 1/4" Thin Rips; The Stabilizing Plate provides 250% more stabilizing surface area. Like a featherboard, it keeps wood locked against the fence for a smooth cut – virtually eliminating binding.
  • Virtually Eliminates Kickback
  • Work with Small Stock Safely on the Table Saw, Router Table, Jointer, & Band Saw
  • 3-Directional Force for total control of the workpiece
  • Moving-Blade-Guard Hand protection

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades