Download the Pattern Below
This is just a demonstration board. The final track should be at least 30" long.
This mini racer set can be made as long as you like. Probably a minimum of 30" long.
I included a pattern for the starting gate but I ran out of time to get a finish winner gate. I'll see
if I can come up with one and add it later.
These cars are small. The numbers are very small. You skip the numbers and either draw them on or use stickers. I cut them with a #3 blade. I used a 1/32" drill bit.
If anyone has ideas for a finish gate that shows the winner let me know. Some kind of flip gate that is simple and can be cut from 1/4" wood is ideal.
Once again I am right up to my deadline so I will cut this short tonight.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.