Monday, November 26, 2007

Layered Elephant Bank Pattern

Here is a prototype for a layered elephant bank scroll saw pattern. I cut this pattern from mdf to get the proportions correct. I am going to eventually cut this from hardwood. I thought I would go ahead and post this pattern because I have not posted much lately. I am basically satisfied with the way it turned out. I used 1/2" material for each layer which works out alright.

After you complete the elephant use it to mark the foot placement on the base. You can then cut the holes in the base and glue the elephant in place.

When I cut this from a hard wood I will take much more time sanding and rounding the body of the elephant. The goal is to make the seams disappear as much as possible.

Free Scroll Saw Pattern Download

Please consider a donation. Thank you.