Saturday, November 9, 2019

Personal Nativity Scroll Saw Pattern.


Download Below
I included both "Oh Holy Night" and "O Holy Night" patterns.
I could not find a definitive correct spelling.

This project is small. It is 6" tall and 3.5" wide. I call it a personal Nativity. I think it is just the right size to sit on your desk and be a reminder of the true meaning of Christmas. It would make a nice gift to give out to family and friends before the holidays.

The front layer is 1/2" thick and the backer board is 1/4" thick. Of course, you can skip the backer board if you like. 

I also included the same pattern in two sizes as a Christmas ornament. Just cut the ornament from 1/4" thick wood and skip the backer board.




You can make the cut easier if you stack cut the front and back before you drill the interior holes. Make the stack and cut the outside. Remove the backer board. Drill the interior holes and complete the cuts. This will make sure the backer is an exact fit.


Order Update:

I am running a few days behind on Signature Coin and USB Catalog orders. Every order that has been paid for at this time will ship out either today or Monday. Thanks for your patience.

I have all the Personalized Christmas Ornament orders completed and emailed out. If you are expecting an order that has not been received, please check your spam folder. If they are not there then send me an email and I will make sure you get them.


Personalized Christmas Ornament Patterns:

I am still making good progress on ornament patterns. I should be able to get caught up today. If you have orders in the queue, keep your eye on your email inbox.



The price is $1 per name with a 5 name minimum. I keep the price as low as possible
because I want everyone to have a chance to make these ornaments for family and friends.

You only pay after you have received the order and are 
100% satisfied with the patterns. Invoice included with
the pattern email. Pay by credit card(secure Paypal), check, or cash.

The patterns will be emailed to you after they are completed.
Please allow up to a week for delivery. 

You can use last names on the ornaments if you like but remember that the more letters the more
difficult they are to cut. Ten letters and up gets pretty small. If you need to you can enlarge the patterns by 10% to make the interior cuts larger. No special characters are supported. I can get a hyphen in there but it looks odd. It has to connect the two letters so it does not just fall out.


$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:


Every Scrollsaw Workshop Pattern from 2007-2018 in DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses who support our community.
Home of Pegas scroll saw blades.





Ad: Affiliate

WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM)


Give yourself clean air in your shop for Christmas. I have owned the WEN Air Filtrations system for almost two years. It is only one step in the fight to keep dust out of my lungs but it is an important step. It is under $130 on Amazon and worth every penny.


  • Circulate the air in a 400 square foot room up to 7.5 times per hour
  • Three-speed operation flows air at a rate of 300, 350, or 400 cubic feet per minute
  • Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced
  • Programmable timer automatically shuts unit off after set number of minutes
  • Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

http://www.stevedgood.com/catalog/

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click here for the Free Online Catalog.

-

Wooden Vases on the Scroll Saw Book $12 Each

http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
http://www.stevedgood.com/swpd/swpdorderpage.html
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.