Saturday, December 31, 2016

Adjustable Smart Phone Stand Scroll Saw Pattern.

http://www.stevedgood.com/estore/estore.html

Simple phone and tablet stand.
I needed a stand for my phone so I made one. It's very simple and it's adjustable. It works with my iPhone, iPad mini and iPad 4. It works in landscape and portrait mode. It should work with most devices.  Thick phone cases might require pattern modification.  

I used small self sticking rubber feet on the bottom to keep it from sliding. 

This stand works great if you use your phone for a bed side alarm clock or watch movies at your desk. 


https://gleam.io/y9AJZ/bear-woods-sponsored-75-gift-certificate-giveaway-wwwbearwoodcom
Still time to enter the Bear Woods $75 gift certificate giveaway. Win this and you can stock up on Pegas scroll saw blades, clock inserts or any of hundreds of other scroll saw accessories. Click now.
- -
Coming this February 2017. The ultimate Scroll Saw from Seyco.
Visit Seyco.com for the best customer care and quality products in the scroll saw industry. The scroll saw Specialist.

http://www.stevedgood.com/dvds.html
My updated DVD is now available to purchase. $20 to have every pattern in the Scroll Saw Workshop catalog available at home. 1,964 patterns.
CLICK NOW


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
http://www.stevedgood.com/donate2.html

http://amzn.to/2iOptdpAd: Affiliate

SCROLLNADO Dust collection for the scroll saw (Dewalt DW 788, Delta 40-690, Delta 40-694, Delta 40-695)

  • Inovative dust collection accesory for the scroll saw
  • Picks up nearly all of the dust while scroll sawing
  • Works with Dewalt DW 788, Delta 40-690, Delta 40-694, Delta 40-695
  • Collects dust above and below your workpiece and scroll saw table
  • Installs easily in minutes. Top tube attaches magnetically and is easily adjusted.

 

Friday, December 30, 2016

Dave Kettunen talks fretwork clocks. Big fretwork clocks. Wooden Journal Scroll Saw Pattern.

http://www.stevedgood.com/estore/estore.html
A few years ago I had the pleasure of posting some of Dave Kettunen's work here on the blog. Dave is back with another article to give some insight and tips on working on these complex projects. Dave is a master fretwork clock builder with several years of experience. He is kind enough to share his knowledge with us again.  Check out his Facebook Page for more.

 Hi,  I want to introduce myself, I’m David Kettunen.  I started scroll sawing around 2009 when I was given a saw (Hegner V22) by my uncle who had to leave his house for assisted living.  I started cutting very simple things such as ornaments to “get the feel” of how the saw operates/cutting.

I graduated into cutting clocks about 6 months later and cut a bunch of Gothic Wall Clocks as gifts to my boiler operators when I retired.  Since that time and up until now, I’ve cut 22 different designs (some of them multiple times as stated before).  Almost all of my finished works were given as gifts to family/friends.

Some of the things that I’ve learned over the years is many of the plans sold today are from hand drawn plans.  Many of them are copies of copies and the parts are not necessarily “true” so I’ve had to make allowances and sometimes redo a few parts.  I precut as many of the pieces as possible to keep them the same width and height (again lessons learned here) so I’m not too worried when the print is not quite square.  If you don’t have the tooling, make absolutely sure that the print is square and true (hand correct if necessary).  I’m blessed with all the tools necessary to take rough cut boards and make finished boards for my projects.

One of the first things I do when I get a new set of plans is to have 2 copies made.  One is marked as original (usually the purchased plan) and the second is the working copy and the third is cut up and scanned into my computer.  All plans have multiple parts and you don’t want to pay to have that many copies made.  I’m graduating to cutting my favorite clocks at 65 to 75% of scale so I’ve reprinted and rescanned as a PDF file.  That works great for resizing.

I’m not going to get into recommendations as to saws and saw blades to buy.  Everyone has their favorite.  That being said, I would highly recommend that if you want to tackle some of the more detailed clock plans available, get the highest quality saw you can afford.  It will make cutting that much more enjoyable.  I’m getting close to having over 1000 hours on my saw now and I have no idea how many hours my uncle had on it, so it’s served both of us well.


For those of you that are on Facebook, you can visit my home page and view my work in my album.

 ___________________________________________________
Now for today's project. This wooden journal uses 5.5" X 8.5" lined filler paper. It also uses 1" book rings. I purchased both at Staples. There are seven different designs in the pattern book. The one in the picture was customized with my daughters name. You can use any stencil font to customize your journal. Here is a link the the font I used.  www.stevedgood.com/WordArt.ttf

Just download and install the font on your computer. You can then use any program that will let you set the size of the font and print out the name. My Stencil Printer program in the eStore will work for this. It is Windows PC only so MAC users will have to find another solution.

I made the first page blue so the fretwork would standout. You can cut up some colored card stock or just do what I did and spray paint the first page. Use very light coats to keep the paper from curling.

The picture below shows what I purchased from staples to make the journal. You could substitute yarn for the book rings. The 1 inch book rings will only allow about 75 sheets to be installed in the journal. The paper was $4.50. A 16 pack of the 1" book rings was $4.
 
https://gleam.io/y9AJZ/bear-woods-sponsored-75-gift-certificate-giveaway-wwwbearwoodcom
This is the last day to enter Bear Woods $75 gift certificate giveaway. Don't get left out. Click now. 

Visit my eStore and purchase my entire pattern catalog on DVD for $20. The DVD has 1,964 pattern books. The DVD has every pattern from 2007 thru 2016. 
- -
http://seyco.com/


Visit Seyco.com for the best customer care and quality products in the scroll saw industry. The scroll saw Specialist.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
http://www.stevedgood.com/donate2.html

http://amzn.to/2iMgEoEAd: Affiliate

Jet DC-1100VX-CK Dust Collector

  • Vortex Cone improves chip separation and collector bag packing efficiency
  • Eliminates premature filter clogging for sustained performance
  • Single-stage design for economical and quiet operation
  • Industrial controls designed for years of trouble-free use
  • Quick-connect collection bags with elastic band for fast, easy installation and removal

 

Wednesday, December 28, 2016

Armed Forces Flags

http://www.stevedgood.com/estore/estore.html

These five Armed Forces flags are approximately 10.5" X 6.5". You should get in some good practice cutting stars. :) It would not be too difficult to modify these to add the name of the service member. Just cut the included backer board pattern with the base shown below. Then use my Stencil Printer program to make the name plate to glue to the front of the flag like the example below. Make a spacer to keep the name plate standing proud of the flag fretwork. My Stencil Printer program is donationware and can be downloaded from my eStore. 
 
-
Click to enlarge

Several weeks ago I had the honor of producing a trophy pattern for the Franklin County Girls volley ball team. Assistant varsity coach Tanya Wirtz contacted me and ask if I could come up with a pattern. I received this picture today of the finished trophies and the seniors who received them.&