Saturday, July 31, 2021

Dear God Scroll Saw Pattern.


Click to Enlarge
Download the Pattern below

This 8" X 10" two-layer, "Dear God" pattern has a wonderful message framed in beautiful scrollwork. 

I spent several minutes editing the letters to make them easier to cut. They will still be a challenge if you are not yet proficient with the scroll saw. I suggest a #1 or #3 scroll reverse blade. 

It can be difficult to turn a large board while making small intricate cuts. I am not normally a fan of cutting letters with a spiral blade, but it may be easier in this case. Practice on some scrap and determine what works best for you.

Scrollsaw Workshop Free Online Catalog: 

Click to Enlarge

I know that most of you know this information but I want to share it with those who are new. After I post a free pattern I upload it to my free online catalog. There are currently closer to 3,500 free patterns available for download.

It is very basic to use. Here are the key points. Note the numbers on the image above.

1. Search input: This is the place to start if you have an idea of what you are looking for. Type "basket" in the search box and all the patterns that have "basket" in the title or description will show up.

2. Category: There are several categories. When I upload a pattern to the catalog I try to select the most appropriate category for the project. You can narrow searches down considerably by selecting a category. If you need a baseball pattern, select the "Sports" category. There is also an "All" category. This obviously shows every pattern. It will take a while to go through them but they are all there.

3. Results. This simply allows you to set the number of pattern thumbnails that will display on each page.

4. Thumbnails of the pattern. The first page that loads have the last 12 patterns that I have uploaded. Simply click the image and a dialog will open that allows you to download the pattern. This section will change based on your selections above.

The patterns in this catalog are free. I work on donations for these patterns. If you enjoy the patterns and would like to support what I do then I appreciate any donations I receive. Do not feel obligated to donate. You may sell the projects made from these patterns. You may not distribute or upload the patterns to another site. I retain the copyright to the pattern. The patterns, cannot be sold or included in a collection of patterns to be sold. I appreciate your cooperation. Enjoy the patterns.

Catalog Link



$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2020 on DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.


for you scroll saw ready boards.

Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill

 
 
Ad Affiliate

POWERTEC DC5370 Wall Mounted Dust Collector with 2.5 Micron Filter Bag | 537 CFM


Currently $219.99 on Amazon. This looks like a decent small shop dust collector. It needs a 4" hose. The hose is available on the Amazon page also.

Take a few minutes to read the Amazon customer reviews. They will give you a good set of expectations on what this unit can and cannot do.






  • Includes: (1) wall hanging dust collector with mounting bracket and (1) 2. 5 micron dust collector filter bag
  • Reusable micron bag: ensures optimal air quality, free from harmful pollutants and fine dust particles – comes with built-in window to view dust level and an easy-dust disposal zipper
  • Compact size is ideal for small Pro or hobby shop
  • "Power specs: features 1 HP electric motor with dual voltages 120V/240V | 7 amp at 120V, 3. 5 amp at 240V; motor speed: 3450 RPM | airflow capacity - 537 CFM"
  • "Compatibility: possesses a 4 inch Inlet port – allowing you to attach the dust-collector hose directly to whatever machine you are using "

Friday, July 30, 2021

Large Initial Door Ornaments Scroll Saw Pattern.


 
Click to Enlarge
 Download the Pattern Below


A set of large layered initial ornaments. The frame is ~10" tall. 

If you cut these as door ornaments then you may want them larger. If you are using the default PDF viewer you can scale the print. Adobe Acrobat Reader DC has a built-in poster print feature. Look at the print dialog below. It highlights what is need to print this pattern to 150%. That print will be of four sheets of paper and the ornament frame will be ~15" tall. Just remember to print the letter at the same scale.

Click to Enlarge

Sheet goods are heavy. This will help.


This build video comes from the WillWood YouTube channel. For very little cost, this simple little tool will make moving large sheet goods easier. When you go to the big box store for a 4' X 8' sheet of plywood just take this along. 

I don't think the wheels are large enough to go over thresholds but they will get you most of the way. I think I would add rubber pads for better grip and less chance of damage to the plywood.

The key to this tool is the use of hinges. You can't see them in these pictures but once you see the video it will make sense.
 





$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2020 on DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.


for you scroll saw ready boards.

Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill


 
Ad Affiliate

eTape16 Digital Electronic Tape Measure – For Accurate Measuring – Time-Saving Construction Tool – Red Polycarbonate Plastic– 3 Memory Functions – 16 Feet







About this item

  • Accurate measuring: ensure that your measurements are accurate and easy to read when equipped with this Etape16 digital tape measure for residential or commercial projects.
  • Durable construction: this digital tape measure is crafted with weather-resistant polycarbonate plastic for durability and boasts a bright red color to easily locate in your tool box.
  • Multiple memory functions: with three memory functions and a side button wheel to access functions, you can measure multiple areas with ease without having to write down the calculations.
  • Time-saving tool: spend less time recording measurements and more time getting work done when you add this digital tape measure to your collection of tools.
  • Us/metric conversion: let this digital tape measure do the work for you, offering accurate readings and US/metric conversion with a re-zero option.

Wednesday, July 28, 2021

Martial Arts Belts Scroll Saw Pattern.


Click to Enlarge
 Download the Pattern Below

I was asked if I could do a martial arts pattern. Let me start by saying that I know nothing about martial arts. I tried to do some research but it is a little confusing to me. My intention is for these trophies to honor the student who receives their new martial arts belt. I think there are more belts than the ones I am showing but it seemed like these were the most common.

I apologize that I do not have a female version. If this pattern is acceptable and accurate I will go back and draw a female version. Anyway, that said maybe a few of you can use this.

Bouns Pattern: Tom Brady 

Click to Enlarge
Download the Pattern Below

This will be a challenging pattern for some. There are very small interior cuts. You will need at least a 1/16" drill bit and a #1 spiral blade for the small version. I also included a larger version that will be a little less challenging.

I wish I had more time to do requested patterns but it gets tough. I have spent some time this week trying to design a few patterns that people have requested. When a request comes in that I think I can use on the blog I will add them to my to-do list. Some pattern requests are so unique that there would be next to no other people who could use them. 

I can only do a small fraction of the requests because of time. As an example, the Tom Brady pattern was a request and it took me about two hours to complete. I average several requests a week so you can see the problem. If I have ignored your request I'm sorry. I wish I could do more.


$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Martial Arts Belts

Tom Brady Portrait

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2020 on DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.


for you scroll saw ready boards.

Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill


  

Ad Affiliate

DEWALT Scroll Saw, Variable-Speed, 1.3 Amp, 20-Inch (DW788)




About this item

  • Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
  • Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
  • On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
  • Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
  • Arm lifts so blade can be easily threaded through the material for inside cuts

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

http://www.stevedgood.com/catalog/

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click here for the Free Online Catalog.

-

Wooden Vases on the Scroll Saw Book $12 Each

http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
http://www.stevedgood.com/swpd/swpdorderpage.html
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.
Download the Free Oval Key Chain Pattern Maker. Create Oval key chain patterns in seconds.
Download Version .9a
Please consider a $5 donation for The Oval Key Chain Pattern Maker.

T-Shirts and More.

T-Shirts and More.
Show your love for the hobby and support the Scrollsaw Workshop. Safe and secure order fullfilled by CafePress. Take a look. You are sure to find something you like. CLICK THE IMAGE to visit the store.

The Lifter

Papa's Custom Patterns.

www.papasworkshop.net

Philip Lowndes Noah's Arc Pattern Available. Watch the video below.

This video is from Philip Lowndes. He is the designer of this beautiful Noah's Arc puzzle pattern. If you would like the pattern follow the link below.
Buy This Wonderful Heirloom Puzzle Pattern