Sunday, February 19, 2017

The Fab Four Scroll Saw Portrait Pattern.
I was on a portrait pattern kick yesterday so I just kept going today. This pattern of a young Fab four is over 16 inches wide. The pattern is split into four pages. You will print and reassemble the pattern before you apply it to the board.

I used 1/4" Baltic birch plywood for the portrait and 1/4" thick cheap ply for the backer board that is painted black. Both boards are 16.75" X 13.5". I made a custom frame and painted it black also.

If you have not cut portrait style pattern before here are a couple of tips. The size of this pattern makes it much easier to cut with spiral blades. I cut most of this pattern with a #3 spiral. I used a #5 for the large interior cuts just to speed thing up a little. If you need a source for spiral blades check out our monthly giveaway sponsor, Bear Woods.

When you get ready to cut this portrait plan ahead. Save the largest interior cut until last. If you cut them early the strength of the board suffers and can make it more difficult to handle.

If this will be your first time using spiral blades make sure you practice on scrap wood first. Enven if you occasionally use spirals you should warm up for a few minutes before you start cutting on the final piece.

Remember that the pattern lines can be altered on the fly. If you come to a place and think that the cut is too difficult then cheat the line until you are confident in the cut. The lines in this pattern are just representations of the contrast between the highlights and shadows of the original image. If you wander off the line a little don't panic. No one will notice in the final piece.

I enjoyed the two portrait patterns I posted this weekend. I was able to practice a new design style and using spiral blades that I rarely ever use. That's enough of a good thing though. Because I am not that proficient with spiral blades the Beatles portrait took me a few hours to cut. Because I was not as comfortable with the spirals I built up tension in my body. My neck and back hurts. When I am cutting relaxed I can cut for hours with no discomfort.

There is a good lesson here. Any time you feel pain try to analyze the reason. If you are not normally prone to pain then you are probably using poor technique at the saw. Watch your posture. No hunching over the table. Make sure the seat is at the proper height. Use good light and take frequent breaks.

Watch for signs of tension in your body. Are you grinding your teeth or holding your breath? Do your neck muscles feel tight? Do you have a death grip on the wood? All of these can be signs that you need to relax. Take a break then come back and figure out what was causing the tension. Eliminate any physical stress you can or you will end up feeling the results. Prolonged physical can cause permanent damage and end your hobby. Take it serious.


Don't forget to visit my blog and submit your daily entry to win the $75 Bear Woods sponsored gift certificate. Remember that you can no longer enter the contest directly from the email newsletter. Please visit my blog and look for the Gift certificate. Click it to enter.


Most of you read my blog through the email newsletter. A reminder that the newsletter is just a copy of the daily blog post. Those posts stay on the blog forever. Every post since 2007 is still there. If you misplace a newsletter or lose the daily pattern you can go to my blog and it will be there. The patterns are archived in the free online catalog. 

The posts are in a journal format. The last two posts stay on the front page. When a new post goes up the third goes to the next page. At the bottom of the second post is a widget that lets you go back to the previous posts. 

In the left hand column of the blog is an archive list. If you know the date you can just select it there. 

Even more helpful is the blog list. I maintain a page that shows the title and a few key words for every post. You can find the list at this link.

I always have trouble keeping up with email. Some days I can get over 100 emails. In an effort to reduce the overload I will probably not answer email that ask if I can send the newsletter again. I don't have control of the newsletter delivery. That is done by Google automatically when I upload a post to the blog. I won't resend the daily pattern because it is in the catalog. Thanks for understanding.

- -

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.
This DVD has 1,964 patterns published from 2007 thru 2016.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

You can view a video showing use of the DVD on a Windows PC and a MAC at this link

Click here to Order. 
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated.

Ad Affiliate

Wooden Bowls from the Scroll Saw

While wood bowls are commonly made on a lathe, this guided resource offers 28 projects for crafting beautiful bowls with the more accessible scroll saw. You will not believe these bowls were made without a lathe!