Hand Cut Christmas Card Scroll Saw Pattern.

Make your own hand cut Christmas cards this year. Do you need 15 Christmas cards? No problem because we are going to stack cut as many as you need. This is actually slightly different than stack cutting. I call this sandwich cutting.

We will sandwich as many sheets of cardstock as you need cards between two sheets of 1/8" Baltic birch plywood. The plywood is sacrificial and is just used to carry the cardstock

This technique works very well and leaves a nice clean cut on the cardstock. They look like they were cut with an Exacto knife. I like to use either a #2/0 or #1 blade. Anything larger tends to leave a rougher cut. Up to 10 or 15 sheets will still cut okay with a #2/0 blade. Larger stacks need the #1.

I buy the Marth Stewart cardstock from Michaels Craft store. It is very high quality.

The cards need a 4.75" X 6.5" envelope. Here is an Amazon link to a set of 50 red envelopes that will work. They are only $8 for the set. Click here for envelopes.

We are going to cut several cards at the same time.

Sandwich all the sheets of cardstock between two

sheets of 1/8” Baltic birch plywood 

The final stack needs to be 9.5” X 7”. I am running the
stack through the table saw to get it down to size.

 Cut the pattern at the dotted line to prepare it to be
glued to the stack.

 Wrap the stack in blue painters tape. Use spray adhesive
to glue the pattern to the stack.

Drill all the interior entry holes. You will need a small
bit. I used a micro bit but you can probably use a 1/16”
bit.

To get a nice clean cut in the paper I used a #2/0
blade.

It’s time to cut the pattern. There are a few small
interior cuts so take your time. Be as accurate as
you can. The paper will have some small pieces
and will be delicate until it is clued to the backer page.

 After you finish all the interior cuts it’s time to cut the
perimeter. Not the small notches ate the fold line. Use
the blade to make a small cut at the notches. This cut
will make it easier to find the fold line.

 Remove all the cards from the stack. I cut five but it
is just as easy to cut fifteen.

Use a metal rule to start the fold.

 The second page of the pattern is a template for the backerpage. Use it to cut the backer page to size.

Use stick glue to glue the backer page to the back of
the front cover of the card.

Click here to order your personalized Signature Coins.

$12 per set of 12 coins plus $3.50 shipping.

These coins will add a special touch to those special projects.

What better way to sign your wood crafts than with a wooden coin?

Signature Coin Demonstration Video

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Products for your consideration:

Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 

Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.

The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  

Every Scrollsaw Workshop Pattern from 2007-2017 in DVD

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has 2,300 patterns published from 2007 thru 2017.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order. 

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing. 

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

My Sponsors:

Support the businesses who support our community.

Shop Bear Woods for your craft supply needs.

Home of Pegas scroll saw blades.

Visit Heritage Wood Specialties

for you scroll saw ready boards.

Ad: Affiliate

DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw

The DeWalt DW788is probably the most popular scroll saw ever produced. It is used by thousands of scrollers all over the country. There is a reason it is so popular. It is well built and has all the features you will likely need for a hobby or small business scroller. It is priced in the mid-level range at just under $500 on Amazon. 

If you want to move up from an entry level machine and can't afford the high end saw then this is a good option.

• Double parallel-link arm design dramatically reduces vibration and noise for extremely accurate cuts
• Exclusive tool-free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 in
• On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever all located on front upper arm
• Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
• Arm lifts so blade can be easily threaded through the material for inside cuts