Tuesday, April 13, 2021

Cat Bird House Scroll Saw Pattern.


Click to Enlarge
 Download the Pattern Below

Shadow the cat is ready to welcome the birds in your backyard to stay in his birdhouse. Maybe he is welcoming them to his belly. Either way, this is a fun project. 

It is cut completely from 1/4" thick Baltic birch plywood. I used Titebond III water-resistant glue and small brad nails to ensure it can handle the weather. After the exterior paint cures, I will add three coats of spray acrylic inside and out.

Even with the waterproof glue I still added small brad nails for extra holding power. The box is assembled with slot and tab construction for extra strength. 

I cut the hole 1.5" in diameter. That should handle many of the smaller backyard birds.

This is an easy-level project. None of the cuts are difficult and there are few interior cuts. It is basically a simple box with a cat glued on the front. The most difficult cuts are the slot and tab joints. Check their fit before you apply the glue. It is best to undercut slot and tab joints. You can always take a little more off if they are too tight.

My wife, Patty said this project is cruel and that I am warped. She might be right because I am looking forward to getting a photo of a bird's head sticking out of the cat's mouth. ­čś┐


The photos look like the birdhouse is floating. The paint was still tacky and I did not want it to get paint in my light tent. It is just propped up on a small dish.
 

I used a simple rotating door for the clean-out access. Make sure the screw does not go all the way through. The birds could be injured so be careful. 
 


 

Lots going on at Bear Woods.

Click to see all the great deals.
These are not affiliate links.

I have enjoyed my friendship with Stephen Dinesen for a few years now. Stephen is the owner of Bear Woods. I have watched him expand his product line with his customers in mind. If you have not visited Bear Woods in a while you may be surprised to see all the new products. Head on over and take a look.

I like doing business with people I feel I can trust. When I recommend a tool or supply item I want to know that you will be treated like a valued customer. That is absolutely what happens at Bear Woods by Stephen and his staff. 

I have several of Bear Woods products in my shop and they are all quality tools. I own the Pegas scroll saw, a high-speed carving tool, a great shop stool, several of the Pegas blade chucks, Thousands of Pegas, and Niqua scroll saw blades, clock inserts and movements, hardware, and wood products. I even had the unique Pegas band saw in my shop for a while. It is impressive. They sell two-part epoxy that I have a gallon of in my shop. I have not used it yet but everyone tells me it is quality epoxy. Look for future projects using epoxy.

I mention all of these products because I have been pleased with all of them. Stephen absolutely does not stock any poor-quality products. When he is not knowledgeable about a product line he goes to the experts and learns. 

One more thing that makes me happy to work with Stephen is his dedication to charitable efforts. He knows the importance of giving back to our community. 

Take a few minutes and go check out what Bear Woods has to offer. If you don't need anything right now them remember to bookmark the web page so you will have it when you need something.

By the way. In my opinion, Bear Woods sells the two best brands of scroll saw blades. Pegas and Niqua(Flying Dutchman). Using high-quality blades is the number one thing you can do to make using your scroll saw more enjoyable.

Bear Woods


$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2020 on DVD


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.


Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
https://www.stevedgood.com/donate2.html

My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.


for you scroll saw ready boards.

Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill




Give your outdoor projects a chance to survive in the weather. This glue holds up better than any I have ever used.

About this item

  • Waterproof formula that cleans up with water
  • Superior strength
  • Designed for interior and exterior applications
  • Unaffected by finishes
  • Approved for indirect food contact

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

http://www.stevedgood.com/catalog/

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click here for the Free Online Catalog.

-

Wooden Vases on the Scroll Saw Book $12 Each

http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
http://www.stevedgood.com/swpd/swpdorderpage.html
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.
Download the Free Oval Key Chain Pattern Maker. Create Oval key chain patterns in seconds.
Download Version .9a
Please consider a $5 donation for The Oval Key Chain Pattern Maker.

T-Shirts and More.

T-Shirts and More.
Show your love for the hobby and support the Scrollsaw Workshop. Safe and secure order fullfilled by CafePress. Take a look. You are sure to find something you like. CLICK THE IMAGE to visit the store.

The Lifter

Papa's Custom Patterns.

www.papasworkshop.net

Philip Lowndes Noah's Arc Pattern Available. Watch the video below.

This video is from Philip Lowndes. He is the designer of this beautiful Noah's Arc puzzle pattern. If you would like the pattern follow the link below.
Buy This Wonderful Heirloom Puzzle Pattern

Think Safety

Remember to keep the safety of yourself and others in your work shop in your thoughts at all times. Always wear eye and ear protection. Follow all the manufactures warnings that came with your power tools. If I demonstrate something on this web site that you don't feel is safe, don't do it. Your safety is your responsibility. Fingers are handy things, try to keep all of them.
__________________________
Disclaimer:
The Scrollsaw Workshop Blog is in no way affiliated with or sponsored by Scroll Saw Woodworking and Crafts Magazine formerly (Scroll Saw Workshop Magazine) or it's publisher Fox Chapel Publishing.

Scroll Saw Woodworking and Crafts