Download the Pattern Below
This Eagle and Shield pattern is 14" wide. There are five 1/4" thick layers. I am showing two of the layers painted. Paint is only an option.
Scroll saw blades do break but it should be a rare event. I scroll almost every day and when my saws are in proper working order I only break a couple of blades a month. It will be more if I use the very small #2/0 or maybe even the #1 blades. The common blades, #3 and #5 should last until they get dull without breaking.
You can push a blade too hard and cause it to break but most of the time the saw is the problem. If you let the blade get very dull before you change it the chances of breaking get higher. Keep sharp blades in the saw. Over heating the blade will shorten its life.
Troubleshooting breaking blades can be challenging if you don't know what to look for. Anything that causes extra stress on the blade is a potential problem. The clamps need to be in good working order. Look for any sign of wear on the clamp. If your clamps use set screws to hold the blade, check them for burrs or misalignment.
Damage to the upper and lower arms of the saw can cause bad stress. Check the blade for excessive side-to-side movement while it is running. The blades will move front to back but should be straight up and down, side-to-side.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Every Scrollsaw Workshop Pattern from 2007-2020 on DVD
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.
This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
for you scroll saw ready boards.
Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill
Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill